AL1692-30BS7-13 Diodes Incorporated

AL1692-30B DIMMABLE LED DRIVER Description Pin Assignments The AL1692-30B is a high performance, high power factor, high (Top View) efficiency, and high current precision buck-boost and flyback dimmable LED driver for triac dimmable LED lamp applications. The AL1692-30B topology provides an accurate output current over wide 7 VCC 1 D line and load regulation. The wide switching frequency operates at RT 2 boundary conduction mode (BCM) to ease EMI/EMC design and testing, to meet the latest regulatory standards. COMP 3 6 CS The AL1692-30B LED driver integrates a 500V/3A high voltage 4 5 FB GND MOSFET. It can cover 120Vac triac dimmable applications with eliminating the external high voltage MOSFET and Varistor, which will reduce the system BOM cost. The AL1692-30B has the built-in SO-7 thermal fold-back protection trigger point to automatically reduce output current. Other protection features enhance LED lighting Applications system s safety and reliability. Mains Dimmable LED Lamps The AL1692-30B dimming curve is compliant with the NEMA SSL6 Offline LED Power Supply Driver standard. The AL1692-30B applies to a wide range of dimmers, including leading edge and trailing edge dimmer, to achieve deep dimming down to 1%. The AL1692-30B is available in SO-7 package. Features Tight Current Sense Tolerance : 3% Low Startup Current: 100A Typical Low Operation Current: 210A (Switching Frequency at 4kHz) Single Winding Inductor Wide Range of Dimmer Compatibility Integration of 500V/3A MOSFET NEMA SSL6 Dimming Curve Compliant Internal Protections Under Voltage Lockout (UVLO) Leading-Edge Blanking (LEB) Cycle-By-Cycle Over Current Protection (OCP) Output Open/Short Protection (OVP/OSP) Thermal Foldback Protection (TFP) Over-Temperature Protection (OTP) SO-7 Package Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See AL1692-30B Typical Application Circuits L1 R2 FR1 R3 AC D VCC Input 1 7 DB1 RT R1 2 COMP CS 6 3 C2 GND C1 C3 C4 FB R6 4 5 C6 R5 D1 R4 R9 C5 LEDS R7 L2 D2 + R8 AL1692-30B Buck-Boost Application Circuit Pin Descriptions Pin Number Pin Name Function 1 VCC Power Supply Voltage 2 RT Resistor Set the SystemS Maximum t ON 3 COMP Compensation for Current Control 4 GND Ground 5 FB Feedback for LED Open Protection Voltage 6 CS Current Sensing 7 D Drain of the Internal High Voltage MOSFET 2 of 14 AL1692-30B October 2017 Diodes Incorporated www.diodes.com Document number: DS39499 Rev. 3 - 2 NNEEWW PPRROODDUUCCTT U1 AL1692-30B