AL1698-20CS7-13 Diodes Incorporated

AL1698 DIMMABLE LED DRIVER Description Pin Assignments The AL1698 is a high performance, high power factor, high efficiency, (Top View) and high current precision buck-boost and flyback dimmable LED driver for triac dimmable LED lamp applications. The AL1698 topology provides an accurate output current over wide line and load 7 VCC 1 D regulation. The wide switching frequency operates at Boundary RT 2 Conduction Mode (BCM) to ease EMI/EMC design and testing, to meet the latest regulatory standards. COMP 3 6 CS The AL1698 LED driver has a built-in high voltage JFET, which 5 4 ROVP GND provides the system fast start-up time and enables users an easy and stable V supply design. The AL1698 also integrates a 600V/2A high CC voltage MOSFET. It can cover 230V triac dimmable applications SO-7 AC with eliminating the external high voltage MOSFET and V startup CC resistors, which will reduce the system BOM cost. The AL1698 has Applications the built-in thermal fold-back protection trigger point to automatically reduce output current. Other protection features enhance LED lighting Mains Dimmable LED Lamps system s safety and reliability. Offline LED Power Supply Driver The AL1698 dimming curve is compliant with the NEMA SSL6 standard. The AL1698 applies to a wide range of dimmers, including leading edge and trailing edge dimmer, to achieve deep dimming down to 1%. The AL1698 is available in SO-7 package. Features Tight Current Sense Tolerance : 3% Low Operation Current : 310A Single Winding Inductor Wide Range of Dimmer Compatibility Integration of 600V/2A MOSFET Integration of HV JFET NEMA SSL6 Dimming Curve Compliant Internal Protections Under Voltage Lockout (UVLO) Leading-Edge Blanking (LEB) Cycle-By-Cycle Over Current Protection (OCP) Output Open/Short Protection (OVP/OSP) Thermal Foldback Protection (TFP) Over Temperature Protection (OTP) SO-7 Package Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See AL1698 Typical Application Circuits L1 C5 LEDS R7 L2 FR1 + AC Input D1 DB1 R1 VCC D 1 7 RT C2 C1 C3 2 COMP CS 3 6 GND C4 ROVP R6 4 5 C6 R5 R3 AL1698 Buck-Boost Application Circuit Pin Descriptions Pin Number Pin Name Function 1 VCC Power Supply Voltage 2 RT Connect a Resistor to Set the Systems Maximum t ON 3 COMP Compensation for Current Control 4 GND Ground 5 ROVP Connect a Resistor to Set LED Open Protection Voltage 6 CS Current Sensing 7 D Drain of the Internal High Voltage MOSFET 2 of 15 AL1698 September 2019 Diodes Incorporated www.diodes.com Document number: DS42216 Rev. 1 - 2 NNEEWW PPRROODDUUCCTT U1 AL1698