AL8853S-13 Diodes Incorporated

AL8853 HIGH PERFORMANCE BOOST LED CONTROLLER Description Pin Assignments The AL8853 is a highly integrated and cost effective Light Emitting Diode (LED) controller. It provides a high performance LED backlight (Top View) solution with low BOM cost. The AL8853 contains a PWM boost driver which uses current mode VIN 1 8 PWM control and fixed frequency operation to regulate the LED current. The LED current is sensed through an external current sense resistor. GATE 2 7 OVP The voltage across the sensing resistor is compared with reference level of 200mV, the error is amplified to control the pulse width of the 3 GND 6 COMP power switch thus to regulate the current flowing the LED. CS 5 FB 4 The AL8853 offers PWM to analog dimming mode for a wide range of dimming control. SO-8 (Type TH2) The AL8853 has comprehensive protection features such as power MOSFET Over Current Protection (OCP), Output Over Voltage Applications Protection (OVP), Diode & Inductor short protection, LED cathode LCD TV short to GND protection, IC power supply Under Voltage Lockout LCD Monitor (UVLO), LED open protection, V short protection and Over OUT Flat Panel Display Temperature Protection (OTP). Constant Output Voltage Driver The AL8853 is available in the SO-8 (Type TH2) package. Features Wide Input Voltage Range: 6.0V to 40V High Precision Feedback Reference Voltage: 200mV/3% Current Mode PWM Controller with Good Dynamic Response PWM to Analog Dimming Mode Built-In Comprehensive Protections Under Voltage Lock Out (UVLO) Output Over Voltage Protection (OVP) Power MOSFET Over Current Protection (OCP) Diode and Inductor Short Protection LED Cathode Short to GND Protection LED Open Protection V Short Protection OUT Over Temperature Protection (OTP) Available in Pb-Free SO-8 (Type TH2) Package Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See AL8853 Typical Applications Circuit L1 F1 VIN D2 D1 EN R4 C3 PWM VIN PWM R1 C1 GATE OVP GND COMP GND Q1 C2 R5 FB CS R2 R3 R6 Figure 1. Typical Applications Circuit Pin Descriptions Pin Number Pin Name Function 1 VIN Power Supply Input 2 GATE Gate Drive Output 3 GND Ground 4 CS Current Sense Input 5 FB LED Current Feedback 6 COMP Boost Converter Loop Compensation 7 OVP Over Voltage Protection Sense 8 PWM PWM Signal Input for Analog Dimming Control 2 of 15 September 2019 AL8853 Diodes Incorporated www.diodes.com Document number: DS42211 Rev. 1 - 2 NEW PRODUCT AL8853