AP1086KG-13 Diodes Incorporated

AP1086 1.5A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Description Pin Assignments (Top View) AP1086 is a low dropout positive adjustable or fixed-mode regulator with 1.5A output current capability. The product is V 3 IN specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination 2 V OUT and low current 3.3V logic supply. AP1086 is also well suited for other applications such as VGA cards. AP1086 is 1 Adj (GND) guaranteed to have lower than 1.4V dropout at full load Tab is V OUT current making it ideal to provide well-regulated outputs of TO252-3L 1.25V to 5.0V with 4.7 to 12V input supply by different output voltage. (Top View) 3 V IN Features 2 V OUT 3-Terminal Adjustable or Fixed 1.5V, 1.8V, 2.5V,3.3V, 1 Adj (GND) 5.0V Tab is V OUT 1.4V Maximum Dropout at Full Load Current TO263-3L Fast Transient Response Built-in Thermal Shutdown (Top View) Output Current Limiting Lead Free Packages: TO252-3L, TO263-3L, TO220-3L 3 V IN TO252-3L, TO263-3L, and TO220-3L: Available in 2 V OUT Green Molding Compound (No Br, Sb) 1 Adj (GND) Lead Free Finish/ RoHS Compliant (Note 1) Tab is V OUT TO220-3L Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at - AP1086 1.5A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Pin Descriptions Pin Name I/O Pin Description Adj (GND) 1 Adjustable (Ground only for fixed mode) The output of the regulator. A minimum of 10uF capacitor must be connected V O 2 OUT from this pin to ground to insure stability. The input pin of regulator. Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the V I 3 IN minimum dropout voltage during the load transient response. This pin must always be 1.4V higher than V in order for the device to regulate properly. OUT Functional Block Diagram 3 2 V V IN OUT + + + - 1.25V CURRENT LIMIT + Thermal 1 Adj Shutdown Absolute Maximum Ratings Symbol Parameter Rating Unit V DC Supply Voltage -0.3 to 12 V IN o T Storage Temperature -65 to +150 C ST o T Maximum Junction Temperature 150 C MJ Recommended Operating Conditions Symbol Parameter Min Max Unit o Top Operating Junction Temperature Range 0 125 C 2 of 10 June 2010 AP1086 Diodes Incorporated www.diodes.com Document number: DS31028 Rev. 6 - 2