AP2280-2FMG-7 Diodes Incorporated

AP2280 Single Channel Slew Rate Controlled Load Switch Features Description Wide input voltage range: 1.5V 6V The AP2280 slew rate controlled load switch is a single P-channel MOSFET power switch designed for high-side load-switching or Low R : 80m typical 5V DS(ON) power distribution applications. The MOSFET has a typical Turn-on slew rate controlled R of 80m at 5V, allowing increased load current handling AP2280-1: 100us turn-on rise time DS(ON) AP2280-2: 1ms turn-on rise time capability with a low forward voltage drop. The turn-on slew rate of Very low turn-on quiescent current: << 1uA the device is controlled internally to reduce turn-on inrush current. Fast load discharge pin Temperature range -40C to 85C The AP2280 load switch is designed to operate from 1.5V to 6.0V, making it ideal for 1.8V, 2.5V, 3.3V, and 5V systems. The typical SOT25 and DFN2018-6: Available in Green Molding Compound (No Br, Sb) quiescent supply current is only 0.004uA, making it ideal for Lead Free Finish/ RoHS Compliant (Note 1) battery powered distribution system where the power consumption is a concern. Applications Smart Phones Personal Digital Assistant (PDA) Cell Phones GPS Navigators Bluetooth Headsets PMP/MP4 Notebook and Pocket PC Ordering Information AP2280 - X XX G - 7 Package Green Turn- on rise time Packing 1 : 100us G : Green W : SOT25 7 : Tape & Reel 2 : 1ms FM : DFN2018-6 Package Packaging 7 Tape and Reel Device Code (Note 2) Quantity Part Number Suffix AP2280-1WG-7 W SOT25 3000/Tape & Reel -7 AP2280-2WG-7 W SOT25 3000/Tape & Reel -7 AP2280-1FMG-7 FM DFN2018-6 3000/Tape & Reel -7 AP2280-2FMG-7 FM DFN2018-6 3000/Tape & Reel -7 Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at AP2280 Single Channel Slew Rate Controlled Load Switch Pin Assignments (1) SOT25 (2) DFN2018-6 ( Top View ) ( Top View ) DIS 1 5 EN OUT 1 6 IN GND 2 GND 2 5 IN OUT 3 4 IN 3 4 DIS EN Pin Description Pin Number Pin Name Description SOT25 DFN2018-6 Discharge pin. If DIS pin is tied to OUT pin externally, the output voltage DIS 1 3 will be discharged to ground when disabled. GND 2 2 Ground. Voltage output pin. This is the pin to the P-channel MOSFET drain. OUT 3 1 Bypass to ground through a 0.1uF capacitor. Voltage input pin. This is the pin to the P-channel MOSFET source. IN 4 5, 6 Bypass to ground through a 1F capacitor. EN 5 4 Enable input, active high Block Diagram AP2280 Rev. 6 2 of 12 FEBRUARY 2009 www.diodes.com Diodes Incorporated