AP22811 SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH Description Pin Assignments The AP22811 is a single channel current-limited integrated high-side (Top View) power switch optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and is available with both polarities of Enable input. OUT 1 5 IN The device has fast short-circuit response time for improved overall GND 2 system robustness, and has an integrated output discharge function to ensure completely controlled discharging of the output voltage FLG 3 4 EN/EN capacitor. They provide a complete protection solution for applications subject to heavy capacitive loads and the prospect of short circuit, and offer reverse current blocking, over-current, over-temperature SOT25 and short-circuit protection, as well as controlled rise time and (Top View) under-voltage lockout functionality. A 6ms deglitch capability on the open-drain Flag output prevents false over-current reporting and does 1 8 OUT GND not require any external components. 7 IN 2 OUT The AP22811 is available in a standard Green SOT25 and MSOP-8 6 OUT IN 3 packages with RoHS compliant. 4 5 EN/EN FLG Features MSOP-8 Input Voltage Range: 2.7V to 5.5V 50m On-resistance Applications Built-in Soft-start with 0.6ms Typical Rise Time Integrated Load Switches in Ultrabook PCs Fault Report (FLG) with Blanking Time (6ms Typ.) Power Up/Down Sequencing in Ultrabook PCs ESD Protection: 2kV HBM, 200V MM Notebook Active Low (B) or Active High (A) Enable Netbook Protection Set-Top Boxes Over Current with Auto Recovery SSD (Solid State Drives) Short Circuit with Auto Recovery Consumer Electronics Over Temperature with Auto Recovery Tablet PC Output Reverse Current / Voltage Protection Telecom Systems Thermally Efficient Low Profile Package Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) UL Recognized, File Number E322375 IEC60950-1 CB Scheme Certified Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See AP22811 Typical Applications Circuit Enable Active High IN Load Power Supply OUT 2.7V to 5.5V 0.1F 1F 10k 120F FLG EN/EN GND ON OFF Pin Descriptions Pin Number Pin Name Function SOT25 MSOP-8 Voltage Output Pin, connect a 0.1F bypass capacitor and a high-value 1 6, 7, 8 OUT capacitor to GND, close to IC. (At least 10F in USB application.) 2 1 GND Ground Pin of the Circuitry Over Current and Over temperature fault report 3 5 FLG Open-Drain flag is active low when triggered. Enable Input 4 4 EN/EN AP22811A: Active High AP22811B: Active Low Voltage Input Pin, connect a 1F low ESR capacitor to GND, close to 5 2, 3 IN IC. Functional Block Diagram Current IN OUT Sense UVLO Discharge Control Current Driver Limit EN/EN FLG Deglitch Thermal Sense GND 2 of 17 AP22811 July 2017 Diodes Incorporated www.diodes.com Document number: DS39135 Rev. 4 - 2 NEW PRODUCT