AP4310AUMTR-AG1 Diodes Incorporated

A Product Line of Diodes Incorporated AP4310A DUAL OP AMP AND VOLTAGE REFERENCE Description Pin Assignments The AP4310A is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies (Top View) The device contains two Op Amps and a 2.5V precision shunt voltage reference. Op Amp 1 is designed for voltage control with its non- OUTPUT 1 1 8 VCC inverting input internally connected to the output of the shunt regulator. Op Amp 2 is for current control with both inputs 2 7 uncommitted. The IC offers the power converter designer a control INPUT 1- OUTPUT 2 solution that features increased precision with a corresponding reduction in system complexity and cost. INPUT 1+/VKA 3 6 INPUT 2- The AP4310A is available in SO-8 package. 5 INPUT 2+ GND 4 Features SO-8 OP Amp Input Offset Voltage: 0.5mV Supply Current: 75 A per OP Amp at 5.0V Supply Voltage Applications Unity Gain Bandwidth:1MHz Battery Charger Output Voltage Swing: 0 to V -1.5V CC Switching Power Supply Power Supply Range: 3 to 36V Voltage Reference Fixed Output Voltage Reference: 2.5V Reference Voltage Tolerance :0.4% Sink Current Capability: 0.05 to 80mA Typical Output Impedance: 0.2 Totally Lead-free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See A Product Line of Diodes Incorporated AP4310A Functional Block Diagram 1 8 OUTPUT 1 VCC Op Amp 1 - + INPUT 1- 2 7 OUTPUT 2 - + 3 INPUT 1+/VKA 6 INPUT 2- Op Amp 2 V 5 GND 4 INPUT 2+ REF Absolute Maximum Ratings (Note 4) Symbol Parameter Rating Unit Power Supply Voltage (VCC to GND) 40 V V CC Op Amp1 and 2 Input Voltage Range (Pins 2, 5, 6) -0.3 to V +0.3 V CC V IN Op Amp 2 Input Differential Voltage (Pins 5, 6) 40 V V ID 100 mA I Voltage Reference Cathode Current (Pin 3) K P 500 D Power Dissipation (T = +25C) A mW T Operating Junction Temperature +150 C J -65 to +150 T Storage Temperature Range C STG T +260 C LEAD Lead Temperature (Soldering 10sec) ESD 2000 V ESD (Human Body Model) Note 4: Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to Absolute Maximum Ratings for extended periods may affect device reliability. Recommended Operating Conditions Parameter Min Max Unit 3 36 V Supply Voltage -40 +105 C Ambient Temperature 2 of 8 AP4310A September 2014 Diodes Incorporated www.diodes.com Document number: DS36510 Rev. 2 - 2