AP7341 300mA HIGH PSRR LOW NOISE LDO WITH ENABLE Description Pin Assignments The AP7341 is a low dropout regulator with high output voltage accuracy, low R , high PSRR, low output noise and low quiescent DSON current. This regulator is based on a CMOS process. The AP7341 consists of a voltage reference, error amplifier, current limit circuit and an enable input to turn it on and off. With the integrated resistor network fixed output voltage versions can be delivered. With its low power consumption and line and load transient response, the AP7341 is well suited for low power handheld communication equipment. The AP7341 is packaged in an X2-DFN1010-4 package and allows for smallest footprint and dense PCB layout. PIN1 V , PIN2 GND, PIN3 EN, PIN4 V OUT IN Features Applications Low V and Wide V Range: 1.7V to 5.25V IN IN Smart Phone/Pad Guarantee Output Current: 300mA RF Supply V Accuracy 1% OUT Cameras Ripple Rejection 75dB at 1kHz Portable Video Low Output Noise, 60Vrms from 10Hz to 100kHz Portable Media Player Quiescent Current as Low as 35A Wireless Adapter V Fixed 1.1V to 3.3V OUT Wireless Communication Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See AP7341 Functional Block Diagram V V OUT IN VREF Current Limit EN GND Pin Descriptions Pin Number Pin Name Function 1 V Power Output Pin OUT 2 GND Ground Enable Pin 3 EN This pin should be driven either high or low and must not be floating. Driving this pin high enables the regulator, while pulling it low puts the regulator into shutdown mode 4 V Power Input Pin IN In PCB layout, prefer to use large copper area to cover this pad for better thermal dissipation, Thermal Pad then connect this area to GND or leave it open. However, do not use it as GND electrode function alone Absolute Maximum Ratings (Note 4) ( T = +25C, unless otherwise specified.) A Symbol Parameter Ratings Unit V Input Voltage 6.0 V IN V Input Voltage EN 6.0 V CE V Output Voltage -0.3 to V +0.3 V OUT IN I Output Current 400 mA OUT P Power Dissipation 400 mW D T Operating Ambient Temperature -40 to +85 C A T Storage Temperature STG -55 to +125 C Note: 4. a).Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. b). Ratings apply to ambient temperature at +25C. The JEDEC High-K board design used to derive this data was a 2in. x 2in. multilayer board with 1oz internal power and ground planes and 2oz copper traces on the top and bottom of the board. 2 of 15 AP7341 June 2017 Diodes Incorporated www.diodes.com Document number: DS36523 Rev. 5 - 2 ADVANCED INFORMATION