AP7343Q-09W5-7 Diodes Incorporated

AP7343Q AUTOMOTIVE COMPLIANT 300mA HIGH PSRR LOW NOISE LDO WITH ENABLE Description Pin Assignments The AP7343Q is a low dropout regulator with high output voltage accuracy, low R , high PSRR, low output noise and low DS(ON) (Top View) quiescent current. This regulator is based on a CMOS process. V 1 5 V IN OUT The AP7343Q includes a voltage reference, error amplifier, current limit circuit, and an enable input to turn it on and off. With the GND 2 integrated resistor network fixed output voltage versions can be delivered. EN 3 4 NC With its low power consumption and, line and load transient responses the AP7343Q is well suited for noise sensitive automotive SOT25 applications. Applications The AP7343Q is packaged in SOT25 package, which allows for the smallest footprint and dense PCB layout. Infotainment Power Supplies Automotive RF Supply Features Cameras Automotive POL in ADAS Low V and Wide V Range: 1.7V to 5.25V IN IN Automotive Wireless Communication -40C to +125C Temperature Range Guarantee Output Current: 300mA V Accuracy 1% OUT Ripple Rejection 75dB at 1kHz Low Output Noise, 60Vrms from 10Hz to 100kHz Quiescent Current as Low as 35A V Fixed 0.9V to 3.6V OUT Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q100 Standards for High Reliability AEC-Q100 Grade 1 PPAP Capable (Note 4) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See AP7343Q Pin Descriptions Pin Number Pin Name Function 1 V Power Input Pin IN 2 GND Ground Enable Pin 3 EN This pin must be driven either high or low and must not be floating. Driving this pin high enables the regulator, and pulling it low puts the regulator into shutdown mode 4 NC No Connection 5 Power Output Pin V OUT Functional Block Diagram V V IN V IN OUT V OUT Thermal Thermal VREF VREF Current Limit Current Limit Shutdown Shutdown GND EN GND EN AP7343DQ (With Discharge) AP7343Q (Without Discharge) Absolute Maximum Ratings (Note 5) ( T = +25C, unless otherwise specified.) A Symbol Parameter Ratings Unit ESD HBM Human Body Mode ESD Protection > 2 kV ESD CDM Charge Device Model 500 V V Input Voltage 6.0 V IN V Input Voltage for EN Pin 6.0 V EN V Output Voltage -0.3 to V + 0.3 V OUT IN I OUT Output Current 400 mA PD Power Dissipation 400 mW T Operating Junction Temperature -40 to +150 C J T Storage Temperature -55 to +150 C STG Note: 5. a). Stresses beyond those listed under Absolute Maximum Ratings can cause permanent damage to the device. These are stress ratings only and functional operation of the device at these conditions is not implied. Exposure to absolute-maximum-rated conditions for extended period can affect device reliability. b). Ratings apply to ambient temperature at +25C. The JEDEC High-K board design used to derive this data was a 2 inch 2 inch multilayer board with 1oz. internal power and ground planes and 2oz. copper traces on the top and bottom of the board. Recommended Operating Conditions ( T = +25C, unless otherwise specified.) A Symbol Parameter Min Max Unit V Input Voltage 1.7 5.25 V IN I Output Current 0 300 mA OUT T Operating Junction Temperature -40 +125 C J T Operating Ambient Temperature -40 +125 C A 2 of 16 AP7343Q June 2019 Diodes Incorporated www.diodes.com Document number: DS41595 Rev. 2 - 2