AP7361E 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR WITH ENABLE & PG Description Pin Assignments The AP7361E is a 1A, adjustable and fixed output voltage, ultra-low dropout linear regulator with enable. The device includes pass (Top View) element, error amplifier, band-gap reference, current limit and thermal shutdown circuitry. The device is turned on when EN pin is set to logic OUT 1 8 IN high level. 2 7 PG NC GND 3 6 NC The characteristics of the low dropout voltage and low quiescent ADJ/NC current make it suitable for low to medium power applications, for GND 4 5 EN example, laptop computers, audio and video applications and battery powered devices. The typical quiescent current is approximately U-DFN3030-8 (Type E) 60A. Built-in current-limit, thermal-shutdown and power good functions prevent IC from damage in fault conditions. The AP7361E is available in U-DFN3030-8 (Type E) package. Applications Features Wide Input Voltage Range: 2.2V to 6.0V LCD-TV, Monitor Output Voltage Accuracy: 1% Set-Top-Box Very Low Dropout Voltage (3.3V): 360mV at 1A Typical Home Electrical Appliances Low Quiescent Current (I ): 60A Typical Q Adjustable Output Voltage Range: 0.8V to 5.0V Fixed Output Options: 1.0V, 1.2V, 1.5V, 1.8V, 2.5V, 2.8V and 3.3V High PSRR: 75dB 1kHz Current Limit: 1.5A Fold-Back Short Circuit Protection: 400mA Power-Good (PG) Output for Supply Monitoring and for Sequencing of Other Supplies Thermal Shutdown Protection Stable with MLCC, E-Cap, Tan-Cap or Solid Capacitor 2.2F Ambient Temperature Range: -40C to +85C Available in Green Molding Compound (No Br, Sb) Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. AP7361E Typical Applications Circuit V V IN V IN V OUT OUT IN IN OUT OUT R3 AP7361E AP7361E R C C C C IN R1 OUT IN OUT PG 4.7F 4.7F 4.7F 4.7F Enable Enable EN ADJ EN PG GND GND R2 Adjustable Output Fixed Version with EN Pin Descriptions Pin Number Pin Function Name U-DFN3030-8 (Type E) The output of the regulator. Bypass to ground through at least 2.2F ceramic capacitor. For 1 OUT improved AC load response a larger capacitor is recommended. 2, 6 NC No connection Adjustable voltage version only a resistor divider from this pin to the OUT pin and ground sets 3 ADJ/NC the output voltage. 4 GND Ground 5 EN Enable input, active high Power-Good pin, open-drain output. When the VOUT is below the PG threshold the PG pin is driven low when the VOUT exceeds the threshold, the PG pin goes into a high-impedance state. 7 PG To use the PG pin, use a 10k to 1M pull-up resistor to pull it up to a supply of up to 6V, which can be higher than the input voltage. 8 IN The input of the regulator. Bypass to ground through at least 1F ceramic capacitor. 2 of 17 AP7361E July 2020 Diodes Incorporated www.diodes.com Document number: DS41964 Rev. 1 - 2