ES1G Diodes Incorporated

ES1A - ES1G Green 1.0A SURFACE MOUNT SUPER-FAST RECTIFIER Features Mechanical Data Glass Passivated Die Construction Case: SMA Super-Fast Recovery Time for High Efficiency Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Surge Overload Rating to 30A Peak Moisture Sensitivity: Level 1 per J-STD-020 Ideally Suited for Automated Assembly Terminals: Finish - Matte Tin Annealed over Copper Leadframe Lead Free Finish RoHS Compliant (Notes 1 & 2) Solderable per MIL-STD-202, Method 208 Halogen and Antimony Free Green Device (Note 3) Polarity: Cathode Band or Cathode Notch Weight: 0.064 grams (Approximate) Top View Bottom View Ordering Information (Note 4) Part Number Case Packaging ES1x-13-F SMA 5000/Tape & Reel * x = Device type, e.g. ES1A-13-F Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See ES1A - ES1G Maximum Ratings ( T = +25C, unless otherwise specified.) A Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Symbol ES1A ES1B ES1C ES1D ES1G Unit Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage 50 100 150 200 400 V V RWM DC Blocking Voltage (Note 6) V R RMS Reverse Voltage V 35 70 105 140 280 V R(RMS) Average Rectified Output Current T = +110C I 1.0 A T O Non-Repetitive Peak Forward Surge Current 8.3ms I 30 A FSM Single Half Sine-Wave Superimposed on Rated Load Thermal Characteristics Characteristic Symbol Value Unit Typical Thermal Resistance, Junction to Terminal (Note 5) R 25 C/W JT Operating and Storage Temperature Range T T -55 to +150 C J, STG Electrical Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol ES1A ES1B ES1C ES1D ES1G Unit Minimum Reverse Breakdown Voltage (Note 6) I = 5A V 50 100 150 200 V R (BR)R I = 0.6A 0.90 F Maximum Forward Voltage Drop V V FM 0.92 1.25 IF = 1.0A Peak Reverse Current T = +25C 5.0 A A I RM at Rated DC Blocking Voltage (Note 6) 200 T = +125C A Maximum Reverse Recovery Time (Note 7) t 25 ns RR Typical Total Capacitance (Note 8) C 20 pF T 2 Notes: 5. Unit mounted on PC board with 5.0 mm (0.013 mm thick) copper pad as heat sink. 6. Short duration pulse test used to minimize self-heating effect. 7. Measured with I = 0.5A, I = 1.0A, I = 0.25A. See figure 5. F R RR 8. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2 of 5 ES1A - ES1G January 2015 Diodes Incorporated www.diodes.com Document number: DS14001 Rev. 17 - 2