FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series 7.0 x 5.0mm 33..33VV CCMMOOS LS Looww Jit Jittter Xer XOO FN Package: Recommended Land Pattern: 2 8 2 8 7.0 x 5.0mm Ceramic SMD Product Features 1 to 166 MHz Frequency Range Pin Functions: <1 ps RMS jitter Pin Function 3.3V CMOS/TTL compatible logic levels 1OE Function Pin-compatible with standard 7.0 x 5.0mm 2Ground packages 3Clock Output Designed for standard reflow and washing 4V techniques DD Low power standby mode Pb-free and RoHS/Green compliant Product Description The FN Series 3.3V crystal clock oscillator Part Ordering Information: achieves superb jitter and stability over a broad range of operating conditions and frequencies. A: Product Family FN XXX YYYY The output clock signal, generated internally B: XXX = Frequency Code with a non-PLL oscillator design, is compatible C: YYYY = Specification Code with LVCMOS/LVTTL logic levels. The device, available on tape and reel, is contained in a Following the above format, Saronix-eCera part numbers will be assigned upon 7.0 x 5.0mm surface-mount ceramic package. confirmation of exact customer requirements. Applications Legacy Ordering Information - For Reference Only: Ideal for low jitter or tight stability applications: S 1613 B - 75.0000 (T) 802.11a/b/g WiFi Ethernet SaRonix Packaging (T) = Tape & Reel EPON Fibre Channel full reel increments Product Series Blank = Bulk packaged DSLAM SONET/SDH linecards Frequency Stability Output Frequency (MHz) T1/E1, T3/E3 linecards AA = 20 ppm (-10 to +70 C) A = 25 ppm (-10 to +70 C) Serial Attached SCSI (SAS) B = 50 ppm (-10 to +70 C) E = 50 ppm (-40 to +85C) Server & Storage platforms SaRonix-eCera is a Pericom Semiconductor company US: +1-408-435-0800 TW: +886-3-4518888 www.saronix-ecera.com All specifications are subject to change without notice. FN 3.3 REV2008 DEC29 01.4 1FN 33..33VV CCMMOOS LS Looww Jit Jittter Xer XOO FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series 7.0 x 5.0mm Electrical Performance Parameter Min. Typ. Max. Units Notes Output Frequency 1 166 MHz As speci ed Supply Voltage +2.97 +3.3 +3.63 V 15 1 to 32 MHz 25 32 to 50 MHz Supply Current, Output Enabled mA 40 50 to 80 MHz 55 80 to 166 MHz 10 A 1 to 36 MHz, 100 to 166 MHz Supply Current, Standby Mode 100 A 36 to 70 MHz Frequency Stability 20 to 50 ppm See Note 1 below -20 +70 Commercial (standard) Operating Temperature Range C -40 +85 Industrial (standard) Output Logic 0, V 10% V V OL DD Output Logic 1, V 90% V V OH DD Output Load 15 pF Duty Cycle 45 55 % Measured 50% V DD up to 50 MHz 7 50 to 80 MHz 5 Rise and Fall ns Measured 20/80% of waveform Time 80 to 124 MHz 3 125 to 166 MHz 2.5 Jitter, Phase 1 to 166 MHz 1 ps RMS (1- ) 10kHz to 20 MHz frequency band up to 80 MHz 5 Jitter, ps RMS (1- ) 20.000 adjacent periods Accumulated 80 to 166 MHz 3 up to 80 MHz 50 Jitter, ps pk-pk 100.000 random periods Total 80 to 166 MHz 30 Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (1 year at 25C average effective ambient temperature), shock and vibration. 2. For speci cations othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Typ. Max. Units Notes Input Voltage (pin 1), Output Enable 2.0 V or open Input Voltage (pin 1), Output Disable (low power standby) 0.5 V Output is Hi-Z Internal Pullup Resistance 50 k Output Disable Delay 100 ns Output Enable Delay 10 ms Absolute Maximum Ratings Parameter Min. Typ. Max. Units Notes Storage Temperature -55 +125 C SaRonix-eCera is a Pericom Semiconductor company US: +1-408-435-0800 TW: +886-3-4518888 www.saronix-ecera.com All specifications are subject to change without notice. FN 3.3 REV2008 DEC29 01.4 2