FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series 33..33VV CCMMOOS LS Looww Jit Jittter Xer XOO FN Actual Size = 5 x 7mm Product Features Packaging Outline Pin Functions Less than 1.5 ps RMS jitter with non-PLL design Pin Function 3.3V CMOS/TTL compatible logic levels 1OE Function Pin-compatible with standard 5x7mm packages 2Ground Designed for standard reflow and washing 3Clock Output techniques 7mm 4V DD Low power standby mode Pb-free and RoHS/Green compliant 5mm Product Description The FN Series includes a 3.3V crystal clock oscillator that achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a non-PLL New Part Number Example oscillator design, is compatible with LVCMOS/LVTTL logic levels. The device, available on tape and reel, A = Product Family is contained in a 5x7mm surface-mount ceramic FN 750 0001 B = Frequency Code package. C = Specification Code Note: After July 1, 2007, a Saronix - eCera part number following the above format will be assigned upon confirmation of exact customer requirements. Applications The FN Series is an ideal reference clock for applications requiring low jitter or tight stability, including: Ethernet Legacy Ordering Information (for reference only) FibreChannel Serial Attached SCSI (SAS) S B - 75.0000 (T) 1613 Packaging SaRonix Server & Storage platforms (T) = Tape & Reel full reel increments Product Series Blank = Bulk packaged SONET/SDH linecards Output Frequency (MHz) Frequency Stability T1/E1, T3/E3 linecards *AA = 20 ppM (-10 to +70 C) Note: Recommend S1613XP Series for *A = 25 ppM (-10 to +70 C) applications 100 MHz and higher DSLAM B = 50 ppM (-10 to +70 C) **E = 50 ppM (-40 to +85C) 802.11a/b/g WiFi * Availability varies by frequency. SaRonix-eCera is a Pericom Semiconductor Corporation company 1-800-435-2336 www.pericom.com/saronix 1 All specifications are subject to change without notice. DS 223 Rev G 07/05/07FN 33..33VV CCMMOOS LS Looww Jit Jittter Xer XOO FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series Electrical Performance Parameter Min. Typ. Max. Units Notes Output frequency 1.544 156.25 MHz As speci ed Supply voltage +2.97 +3.3 +3.63 V 15 1.544 to 32 MHz 25 >32 to 50 MHz Supply current, output enabled mA 40 >50 to 80 MHz 55 >80 to 156.25 MHz Supply current, standby mode 10 AOutput Hi-Z Frequency stability 20 to 50 ppM See Note 1 below Operating temperature -40 +85 C As speci ed Output logic 0, VOL 10% V V DD Output logic 1, VOH 90% V V DD Output load 15 pF (max) or 10 LSTTL Duty cycle (1.544 to 80 MHz) 45 55 % -40 to +85C measured 50%VDD Duty cycle (>80 to 156.25 MHz) 45 55 % -10 to +70C measured 50%VDD -40 to-10C, +70 to +85C Duty cycle (>80 to 156.25 MHz) 40 60 % measured 50%VDD up to 50 MHz 7 >50 to 80 MHz 5 Rise and fall ns measured 20/80% of waveform time >80 to 125 MHz 3 >125 to 156.25 MHz 2 up to 80 MHz 1.5 10kHz to 20 MHz frequency band Jitter, ps RMS Phase (1- ) >80 to 156.25 MHz 1 up to 80 MHz 5 20.000 adjacent periods Jitter, ps RMS Accumulated (1- ) >80 to 156.25 MHz 3 up to 80 MHz 50 100.000 random periods Jitter, ps Total pk-pk >80 to 156.25 MHz 30 Notes: 1. As speci ed. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (1 year at 25C average effective ambient temperature), shock and vibration. 2. For speci cations other than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Typ. Max. Units Notes Input Voltage (pin 1), Output Enable 2.2 V or open Input voltage (pin 1), Output Disable (low power standby) 0.8 V Output is Hi-Z Internal pullup resistance 50 k Output disable delay 100 ns Output enable delay 10 ms SaRonix-eCera is a Pericom Semiconductor Corporation company 1-800-435-2336 www.pericom.com/saronix 2 All specifications are subject to change without notice. DS 223 Rev D 07/05/07