TM Application Specific Crystal Oscillator 7.0 x 5.0mm 3.3V CMOS Low-Jitter 133.330 MHz DDR XO FNDDR1133 ASSP XO for Networking 7.0 x 5.0mm Ceramic SMD Package: (Scale: none, Dimensions are in mm) Product Features Very low Pk to Pk jitter - 30ps Max Recommended Land Pattern: Low output current - 20mA Max Low power standby mode RoHS Compliant Product Description This is an enhanced high frequency 3.3V, 133.33MHz crystal clock oscillator with superb jitter and low operating current for DDR cache memory applications in Serial Attached SCSI RAID controller/Host Bus Adapter. Pin Functions: Pin Function Applications 1 OE Function Serial Attached SCSI 3G/6G RAID 2 Ground Controller 3 Clock Output Serial Attached SCSI 3G/6G Host Bus 4 V DD Adapter *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. Part Ordering Information: FNDDR1133 SaRonix-eCera is a Pericom Semiconductor company US: +1-408-435-0800 TW: +886-3-4518888 www.pericom.com 12-0051 All specifications are subject to change without notice. FNDDR1133 Rev D 07/18/12 13.3V CMOS Low-Jitter 133.330 MHz DDR XO FNDDR1133 TM Application Specific Crystal Oscillator 7.0 x 5.0mm Electrical Performance Parameter Min. Typ. Max. Units Notes Output Frequency 133.330 MHz Supply Voltage V 2.97 3.3 3.63 V DD Supply Current, Output Enabled 20 mA Supply Current, Output Disabled 10 A Frequency Stability 50 ppm See Note 1 below Operating Temperature Range -20 +70 C Output Logic 0, V 10% V V OL DD Output Logic 1, V 90% V V OH DD Output Load 15 pF Duty Cycle 45 55 % Measured 50% V DD Rise and Fall Time 2 ns Measured 20/80% of waveform Jitter, Phase, RMS(1- s) 1 ps 12kHz~20MHz Frequency Band Jitter, pk-pk 30 ps 100.000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (1 year at 25C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Typ. Max. Units Notes Input Voltage (pin 1), Output Enable 0.7 V V or open DD Input Voltage (pin 1), Output Disable (low power standby) 0.3 V V Output is Hi-Z DD Internal Pullup Resistance 30 k Output Disable Delay 200 ns Output Enable Delay 2 ms Absolute Maximum Ratings Parameter Min. Typ. Max. Units Notes Storage Temperature -55 +125 C For the latest product information visit: