ASSP VCXO Application Specific Voltage Controlled Crystal Oscillator 7.0 x 5.0mm 3.3V CMOS 16.384MHz Telecom VCXO FRTELE016 ASSP VCXO for Telecommunications 7.0 x 5.0mm Ceramic SMD Package: (Scale: none, Dimensions are in mm) Product Features Recommended Land Pattern: Very low Pk to Pk jitter - 50ps Max Low supply current - 10mA Max Low power standby mode RoHS Compliant Product Description CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. This is an enhanced 3.3V, 16.384MHz with superb jitter and low operating current Pin Functions: for providing clock references in telecom applications. Pin Function 1 Control Voltage 2 Enable/Disable Applications 3 Ground E1 4 Output CEPT1(x8) 5 N/C Modems 6 V DD CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. Part Ordering Information: FRTELE016 SaRonix-eCera is a Pericom Semiconductor company US: +1-408-435-0800 TW: +886-3-4518888 www.pericom.com 12-0050 All specifications are subject to change without notice. FRTELE016 Rev B 07/12/12 1ASSP VCXO 3.3V CMOS 16.384 MHz Telecom VCXO FRTELE016 Application Specific Voltage Controlled Crystal Oscillator 7.0 x 5.0mm Electrical Performance Parameter Min. Typ. Max. Units Notes Output Frequency 16.384 MHz Supply Voltage V 3.135 3.3 3.465 V DD Supply Current, Output Enabled 10 mA Supply Current, Output Disabled 2 mA Frequency Stability 25 ppm See Note 1 below Operating Temperature Range -20 +70 C Output Logic 0, V 10% V V OL DD Output Logic 1, V 90% V V OH DD Output Load 15 pF Duty Cycle 45 55 % Measured 50% V DD Rise and Fall Time 4 ns Measured 20/80% of waveform Jitter, Phase, RMS(1- s) 1 ps 12kHz~20MHz Frequency Band Jitter, Peak to Peak (Pk-Pk) 50 ps 100.000 Random Periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (10 years at +40C average effective ambient temperature), shock and vibration. 2. For specifications other than those listed, please contact sales. Voltage Control Function Parameter Min. Typ. Max. Units Notes Absolute Pull Range (APR) 100 ppm See 1 below Control Voltage Range 0.3 3.0 V As rated Center Control Voltage 1.65 V For RMT Nominal Frequency Monotonic Linearity 10 % Positive Transfer Slope Input Impedance 5000 k Control Voltage Pin Notes: 1. APR is relative to the nominal output frequency APR is inclusive of frequency deviation due to stability. Output Enable / Disable Function Parameter Min. Typ. Max. Units Notes Input Voltage (pin 2), Output Enable 3.0 V or open Input Voltage (pin 2), Output Disable (low power standby) 0.3 V Output is Hi-Z Internal Pullup Resistance 20 k Output Disable Delay 100 ns Output Enable Delay 100 ns Absolute Maximum Ratings Parameter Min. Typ. Max. Units Notes Storage Temperature -55 +125 C For the latest product information visit: