LM2903M8-13 Diodes Incorporated

+ + + + + + LM2901/ LM2901A/ LM2903/ LM2903A DUAL AND QUAD DIFFERENTIAL COMPARATORS Description Pin Assignments The LM2901/2903 series comparators consist of four and two independent precision voltage comparators with very low input offset (Top View) voltage specification. They are designed to operate from a single power supply over a wide range of voltages however operation from 1OUT 1 8 VCC split power supplies is also possible. They offer low power supply current independent of the magnitude of the power supply voltage. 2 7 1IN- - 2OUT 1 3 - 6 1IN+ 2IN- The LM2901/2903 series comparators are designed to directly 2 GND 4 5 2IN+ interface with TTL and CMOS. When operating from both plus and minus power supplies, the LM2901/2903 series comparators will directly interface with MOS logic where their low power drain is a SO-8/TSSOP-8/MSOP-8 distinct advantage over standard comparators. LM2903/ LM2903A The dual devices are available in SO-8, TSSOP-8, and MSOP-8, and the quad devices available in SO-14 and TSSOP-14 with industry (Top View) standard pinouts. Both use green mold compound as standard. 1OUT 1 14 3OUT 2 13 2OUT 4OUT Features 3 12 GND VCC Wide Power Supply Range: 4 11 4IN+ 2IN- - Single Supply: 2V to 36V 2 4 Dual Supplies: 1.0V to 18V - 4IN- 2IN+ 5 10 Very Low Supply Current DrainIndependent of Supply Voltage 1IN- - 9 3IN+ 6 1 3 LM2903: 0.6mA - 1IN+ 7 8 3IN- LM2901: 0.9mA Low Input Bias Current: 25nA SO-14/TSSOP-14 Low Input Offset Current: 5nA LM2901/ LM2901A Typical Offset Voltage: Non-A Device: 2mV A Device: 1mV Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to the Power Supply Voltage Low Output Saturation Voltage: LM2903: 200mV at 4mA LM2901: 100mV at 4mA Output Voltage Compatible with TTL, MOS and CMOS Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See LM2901/ LM2901A/ LM2903/ LM2903A Schematic Diagram V CC Q2 Q3 +INPUT Q1 Q4 OUTPUT -INPUT Q8 Q7 Q5 Q6 Functional Block Diagram of LM2901/2901A/2903/2903A (Each Comparator) Pin Descriptions LM2901, LM2901A Pin Name Pin Function 1OUT 1 Channel 1 Output 2OUT 2 Channel 2 Output V 3 Chip Supply Voltage CC 2IN- 4 Channel 2 Inverting Input 2IN+ 5 Channel 2 Non-Inverting Input 1IN- 6 Channel 1 Inverting Input 1IN+ 7 Channel 1 Non-Inverting Input 3IN- 8 Channel 3 Inverting Input 3IN+ 9 Channel 3 Non-Inverting Input 4IN- 10 Channel 4 Inverting Input 4IN+ 11 Channel 4 Non-Inverting Input GND 12 Ground 4OUT 13 Channel 4 Output 3OUT 14 Channel 3 Output LM2903, LM2903A 1OUT 1 Channel 1 Output 1IN- 2 Channel 1 Inverting Input 1IN+ 3 Channel 1 Non-Inverting Input GND 4 Ground 2IN+ 5 Channel 2 Non-Inverting Input 2IN- 6 Channel 2 Inverting Input 2OUT 7 Channel 2 Output V 8 Chip Supply Voltage CC 2 of 18 September 2018 LM2901/ LM2901A/ LM2903/ LM2903A Diodes Incorporated www.diodes.com Document number: DS36779 Rev 4 - 2