PI3HDMI412ADZBE Diodes Incorporated

D2-B GND D3+B D3-B VDD GND VDD GND SDA/S2 SCL/S3 NC Test out SEL OUT VDD Receiver Equalization PI3HDMI412AD TM 1:2 Active HDMI Compatible DeMux with Advanced Re-Driver Functionality for Enhanced Signal Integrity Features Description Pericom Semiconductors PI3HDMI412AD, active-drive switch Supply voltage, V = 3.3V 5% DD solution is targeted for high-resolution video networks that are TM Compatible w/ DVI, HDMI 1.1, 1.2, and 1.3 signals TM based on DVI/HDMI standards, and TMDS signal processing. Supports both AC-coupled and DC-coupled inputs The PI3HDMI412AD is an active single TMDS channel to two 1:2 Demux TMDS channel DeMux with Hi-Z outputs. The device drives TM Supports Deep Color Signals differential signals to multiple video display units. It provides three controllable output swing levels that can be controlled through Con gurable output swing control (500mV, 750mV, 1000mV) 2 pin control or I C control, depending on the mode select pin. The Con gurable Pre-Emphasis levels (0dB, 1.5dB, 3.5dB, 6.0dB) swing levels are 500mV, 700mV & 1000mV. This solution also Con gurable De-Emphasis (0dB, -1.5dB, -3.5dB, -6.0dB) provides a unique advanced pre-emphasis technique to increase Con gurable Equalization (1dB,3.5dB, 6dB, 8dB) rise and fall times which are reduced during transmission across Data Rate = 2.5Gbps (Max) long distances. Inputs w/ built-in termination TM The maximum DVI/HDMI data rate of 1.65Gbps provides a Propagation delay < 2ns input 1920x1080 resolution required by the next Gen HDTV and PC Uni-Directional graphics products. Due to its active uni-directional feature, this switch is de-signed for usage only for the video drivers side. For 10kV HBM ESD protection on all high speed data channels PC graphics application, the device sits at the drivers side to (Supplemental contact ESD test results are available upon switch between multiple display units, such as PC LCD monitor, request) projector, TV, etc. Packaging (Pb-free & Green): 56-pad TQFN (ZB56) TM PI3HDMI412AD is the industrys rst active DVI/HDMI compliant switch, which ensures transmitting high bandwidth video streams from PC graphics source to end display units. PI3HDMI412AD will also provide enhanced robust ESD/EOS protection, which is required by many consumer video networks today. Block Diagram Pin Con guration D +A D +A 56 55 54 53 52 51 50 49 48 47 46 45 44 43 0 0 MS 1 42 GND D -A D -A 0 0 VDD 2 41 D2+A Pre-emphasis D +A D +A 1 1 GND 3 40 D2-A D -A D -A 1 and Output 1 D0+ 4 39 GND D +A 2 D +A 2 Swing Control D0- 5 38 D3+A D -A 2 D -A 2 VDD 6 37 D3-A D +A Circuitry 3 D +A 3 D1+ 7 36 VDD D -A D -A GND 3 3 D1- 8 35 D0+B D2+ 9 34 D0-B D +B D +B 0 0 D2- 10 33 GND D -B D -B 0 0 Pre-emphasis VDD 11 32 D1+B D +B D +B 1 1 D3+ 12 31 D1-B and Output D -B D -B 1 1 D3- 13 30 GND D +B Swing Control D +B 2 2 GND 29 14 D2+B D -B D -B 2 2 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Circuitry D +B D +B 3 3 D -B D -B 3 3 Control Logic HDMI, High-De nition Multimedia Interface, and Deep Color are trademarks of PS8842M 03/10/08 08-0049 1 HDMI Licensing, LLC in the United States and other countries. OE SEL IN Test In GND A3/S7 A2/S6 A1/S5 A0/S4 VDD D0+A D0-A GND D1+A D1-API3HDMI412AD TM 1:2 Active HDMI Compatible DeMux with Advanced Re-Driver Functionality for Enhanced Signal Integrity Function Block Description Maximum Ratings (Above which useful life may be im- paired. For user guide lines, not tested.) V DD Storage Temperature.....................................65C to +150C 50 50 + y(z) Supply Voltage to Ground Potential.............0.5V to +5V + Dx Dx DC Input Voltage..........................................0.5V to V TMDS DD TMDS Receiver Driver DC Output Current.......................................120mA with EQ + (1) -y Dx Power Dissipation.........................................1.0W Dx Note: Stresses greater than those listed under MAX I MUM RAT INGS may cause permanent damage to the de vice. This is a stress rating only Notes: and func tion al op er a tion of the device at these or any other conditions 1. X = 0,1,2,3 above those indicated in the operational sections of this spec i ca tion 2. Y = A,B is not implied. Exposure to absolute max i mum rating con di tions for extended periods may affect re li abil i ty. Pin Description Pin Pin I/O Description Name 2, 6, 11, 15, 22, 24, 36, 48 V Power 3.3V power supply DD 3, 14, 21, 23, 27, 30, 33, 39, GND Power 0V power supply 42, 45, 53 16 SEL Out O Output bit, that provides information to user as to which port is active, if SEL OUT = LOW, then Port A is active, if SEL OUT = HIGH, then Port B is active. Only used when MS pin is HIGH 2 19 SCL I I C Clock Input Signal 2 20 SDA I/O I C Data Input/Output Signal 18 NC N/A No Connect. 2 1 MS I Mode Select Pin. If MS = HIGH, then I C control is active. Pins 49-52 are 2 2 I C address and pin 19 is SCL and pin 20 is SDA. If MS = LOW, then I C control is inactive and pin programmability is active. Pins 49-52 are control pins only for Port A, S4-S7 and pin 19 is S2 and pin 20 is S3. If MS = LO, Port B cannot be con gured and is left as default. Port B default value is 0dB pre-emphasis, 0dB de-emphasis, and 500mV output swing 2 55 SEL IN I Output port select. (Logically similar to I C bit S1 - see page 3) 54 Test in I Input pin for internal testing. Tie to GND for normal operation 56 OE I Output is enabled and normal when OE = HIGH. If OE = LOW, both outputs, A and B, are disabled and at Hi-Z 17 Test Out O Output pin for internal testing. Not used for normal operation 4, 5, 7, 8, 9, 10, 12, 13 Dx I Input TMDS high speed signals y 28, 29, 31, 32, 34, 35, 40, 41, Dx O Output TMDS high speed signals 43, 44, 46, 47, 25, 26, 37, 38 2 49,50, 51, 52 A0, A1, II C address inputs if MS = HIGH. A2, A3 49,50, 51, 52 S4, S5, I If MS = LOW, then pins 49-52 are control bits S4-S7 for port A only, as S6, S7 shown in truth table on page 3 of datasheet 19 S3 I If MS = LOW, then pins 19 is control bit S3, as shown in the truth table on page 3 20 S2 I If MS = LOW, then pins 20 is control bit S2, as shown in the truth table on page 3 HDMI, High-De nition Multimedia Interface, and Deep Color are trademarks of PS8842M 03/10/08 08-0049 2 HDMI Licensing, LLC in the United States and other countries.