SBR30M40CTFP 30A SBR SUPER BARRIER RECTIFIER Features Mechanical Data Low Forward Voltage Drop Case: ITO-220AB Excellent High Temperature Stability Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Patented Super Barrier Rectifier Technology Terminals: Matte Tin Finish annealed over Copper leadframe. Soft, Fast Switching Capability Solderable per MIL-STD-202, Method 208 Lead-Free Finish RoHS Compliant (Notes 1 & 2) Weight: 1.65 grams (approximate) Also Available in Green Molding Compound (Note 4) Halogen and Antimony Free. Green Device (Note 3) ITO-220AB ITO-220AB Package Pin Out Top View Bottom View Configuration Ordering Information (Notes 4 and 5) Part Number Case Packaging Pb SBR30M40CTFP ITO-220AB 50 pieces/tube SBR30M40CTFP-G ITO-220AB 50 pieces/tube Green SBR30M40CTFP-JT-G ITO-220AB (Alternate) 50 pieces/tube Green Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See SBR30M40CTFP Maximum Ratings (Per Leg) ( T = +25C, unless otherwise specified.) A Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Symbol Value Unit V Peak Repetitive Reverse Voltage RRM Working Peak Reverse Voltage 40 V V RWM DC Blocking Voltage V RM Average Rectified Output Current Per Device (Per Leg) 15 I A O (Total) 30 Non-Repetitive Peak Forward Surge Current 8.3ms I 250 A FSM Single Half Sine-Wave Superimposed on Rated Load Isolation Voltage V 2000 V AC From terminal to heatsink t = 3 sec. Thermal Characteristics (Per Leg) Characteristic Symbol Value Unit Typical Thermal Resistance 4 C/W R JC Operating and Storage Temperature Range -65 to +175 C T , T J STG Electrical Characteristics (Per Leg) ( T = +25C, unless otherwise specified.) A Characteristic Symbol Min Typ Max Unit Test Condition - - 0.65 I = 15A, T = 25C F J Forward Voltage Drop V V F - 0.54 0.59 I = 15A, T = 125C F J V = 40V, T = 25C - 8 75 A R J Leakage Current (Note 6) I R - 3 20 mA V = 40V, T = 125C R J Notes: 6. Short duration pulse test used to minimize self-heating effect. 7. Test with additional heatsink, (Black Aluminum, 37mm x 50mm x 15mm) SBR is a registered trademark of Diodes Incorporated. 2 of 5 August 2012 SBR30M40CTFP Diodes Incorporated www.diodes.com Document number: DS32034 Rev. 3 - 2 NEW PRODUCT