TL072SG-13 Diodes Incorporated

TL072 LOW NOISE JFET INPUT OPERATIONAL AMPLIFIERS Features General Description The JFET-input operational amplifiers in the TL072 are similar to Low Power Consumption the TL082, with low input bias and offset currents and fast slew Wide Common-Mode and Differential Voltage Ranges rate. The low harmonic distortion and low noise make the TL072 Low Input Bias and Offset Currents ideally suited for high-fidelity and audio preamplifier applications. Output Short-Circuit Protection Each amplifier features JFET inputs (for high input impedance) Low Total Harmonic Distortion0.003% Typ coupled with bipolar output stages integrated on a single Low Noise Vn= 18nV Typ at f=1kHz monolithic chip. High Input ImpedanceJFET-Input Stage Internal Frequency Compensation Latch-Up-Free Operation High Slew Rate13V/s Typ Common-Mode Input Voltage Range Includes V + CC SOP-8L: Available in Green Molding Compound (No Br, Sb) Lead Free Finish/ RoHS Compliant (Note 1) Applications Active filters Audio pre-amps Ordering Information TL 072 S G - 13 Package Green Packing S : SOP-8L G : Green 13 : Tape & Reel Packaging 13 Tape and Reel Package Device Code (Note 2) Quantity Part Number Suffix TL072SG-13 S SOP-8L 2500/Tape & Reel -13 Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at TL072 LOW NOISE JFET INPUT OPERATIONAL AMPLIFIERS Pin Assignments (1) Dual channel SOP-8L ( Top View ) 1 8 V OUTPUT1 CC+ 2 INVERTING INPUT1 7 OUTPUT2 TL072 NON-INVERTING INPUT1 3 6 INVERTING INPUT2 NON-INVERTING INPUT2 V - 45 CC SOP-8L Pin Descriptions Pin Name Pin No. Description OUTPUT1 1 Channel 1 Output INVERTING INPUT1 2 Channel 1 Inverting Input NON-INVERTING INPUT1 3 Channel 1 Non-inverting Input V- 4 Supply Voltage CC NON-INVERTING INPUT2 5 Channel 2 Non-inverting Input INVERTING INPUT2 6 Channel 2 Inverting Input OUTPUT2 7 Channel 2 Ouput V+ 8 Supply Voltage CC Block Diagram TL072 Rev. 1 2 of 11 JULY 2009 www.diodes.com Diodes Incorporated