TLV431TFTA Diodes Incorporated

TLV431 1.24V COST EFFECTIVE SHUNT REGULATOR Description Pin Assignments TLV431 H6 (SC70-6 SOT363 ) The TLV431 is a three-terminal, adjustable shunt regulator offering excellent temperature stability and output current handling capability CATHODE 1 6 ANODE up to 20mA. The output voltage may be set to any chosen voltage between 1.24V and 18V by selection of two external divider resistors. N/C 2 5 NC The TLV431 can be used as a replacement for zener diodes in many applications requiring an improvement in zener performance. REF 3 4 NC The TLV431 is available in three grades with initial tolerances of 1%, (Top View) 0.5%, and 0.2% for the A, B, and T grades respectively. TLV431 F (SOT23) Features REF 1 Low-Voltage Operation V = 1.24V REF Temperature Range -40 to +125C 3 ANODE Reference Voltage Tolerance at +25C 0.2% TLV431T CATHODE 2 0.5% TLV431B 1% TLV431A (Top View) Typical Temperature Drift 4mV (0C to +70C) 6mV (-40C to +85C) TLV431 E5 (SOT25) 11mV (-40C to +125C) N/C 1 5 ANODE 80A Minimum Cathode Current 0.25 Typical Output Impedance N/C 2 Adjustable Output Voltage V to 18V REF Lead-Free Finish RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) CATHODE 3 4 REF An Automotive-Compliant Part is Available Under Separate (Top View) Datasheet (TLV431Q) Pin should be left floating or connect to anode Typical Application Circuit Secondary side 3.3 V regulated supply Optocoupler I F Primary side controller R3 R1 TLV431 R2 GND Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See TLV431 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Symbol Parameter Rating Unit V Cathode Voltage 20 V KA Continuous Cathode Current -20 to +20 mA I KA Reference Input Current Range -0.05 to +3 mA I REF ESD Susceptibility HBM Human Body Model 4 kV MM Machine Model 400 V CDM Charged Device Model 1 kV Semiconductor devices are ESD sensitive and may be damaged by exposure to ESD events. Suitable ESD precautions should be taken when handling and transporting these devices. Parameter Rating Unit Operating Junction Temperature -40 to +150 C Storage Temperature -65 to +150 C Operation above the absolute maximum rating may cause device failure. Operation at the absolute maximum ratings, for extended periods, may reduce device reliability. Unless otherwise stated voltages specified are relative to the ANODE pin. These are stress ratings only. Operation outside the absolute maximum ratings may cause device failure. Recommended Operating Conditions ( T = +25C, unless otherwise specified.) A Symbol Parameter Min Max Units V Cathode Voltage V 18 V KA REF I Cathode Current 0.1 15 mA KA Operating Ambient Temperature Range T A -40 +125 C Package Thermal Data P DIS Package JA T = +25C, T = +150C A J SOT23 380C/W 330mW SOT25 250C/W 500mW SC70-6 (SOT363) 380C/W 330mW 2 of 15 TLV431 September 2020 Diodes Incorporated www.diodes.com Document number: DS32088 Rev. 7 - 2