DIO7063AST5 Dioo

Rev 1.2 DIO7063 5.5V Low Loss Power Distribution Switch Features Descriptions z Input voltage: 2.7V to 5.5V The DIO7063 power distribution switch is z Typical 75m on-resistance intended for applications where precision current z 0.9A Continuous Current Capability limiting is required or heavy capacitive loads and z Enable polarity: short circuits are encountered. The power switch DIO7063A: Active high rising and falling times are controlled to minimize DIO7063B: Active Low current surges during turning on/off. The DIO7063 z Under voltage lockout provide 0.9A continuous current modes. z Over current protection, short circuit protection and over temperature protection The DIO7063 device limits the output current z Reverse blocking (no body diode) under a safe level by using a constant current z No reverse current when power ON or power mode when the output load exceeds the current OFF limit threshold. z Compact SOT23-5 and MSOP-8 packages The DIO7063 is available in the SOT23-5 and MSOP-8 packages. It is rated over the -40C to Applications +85C temperature range. z USB Ports/Hubs z Digital TV z Set-Top Boxes z VOIP Phones Typical Application www.dioo.com 2015 DIOO MICROCIRCUITS CO., LTD DIO7063 Rev 1.2 5.5V Low Loss Power Distribution Switch DIO7063 Ordering Information Recommended EN/EN Order Part Top Continuous Package Number Marking Current DIO7063AST5 YW6A 900mA Green Active High SOT23-5 Tape & Reel, 3000 DIO7063BST5 YW6B 900mA Green Active Low SOT23-5 Tape & Reel, 3000 DIO7063AMP8 D63A 900mA Green Active High MSOP-8 Tape & Reel, 3000 DIO7063BMP8 D63B 900mA Green Active Low MSOP-8 Tape & Reel, 3000 Ordering Information Complimentary Note Ordering number = Part No. +Enable Active Version +Package Code DIO7063 A: Enable Active High ST5: Stands for SOT23-5 B: Enable Active Low MP8: Stands for MSOP-8 www.dioo.com 2015 DIOO MICROCIRCUITS CO., LTD DIO7063 Rev 1.2