EA DIP122-5NLED Display Visions

6.2007 LCD GRAPHIC 122x32 INCL. CONTROLLER FOR 8 BIT BUS blue-white: EA DIP122B-5NLW Dimension 75 x 27 mm amber: EA DIP122J-5NLA Dimension 75 x 27 mm yellow/green: EA DIP122-5HNLED Dimension 68 x 27 mm FEATURES * HIGH CONTRAST LCD DISPLAY AS STN AND FSTN * CLASSIC LINE YELLOW/GREEN: EA DIP122-5HNLED * OR BLUE-WHITE EA DIP122B-5NLW * BUILT IN CONTROLLER PT6520 OR COMPATIBLE * INTERFACE FOR 8 BIT DATA BUS * POWER SUPPLY +2.7~5V / -6.3~-4V 800A max. * LED BACKLIGHT Y/G max. 150mA +25C * LED BACKLIGHT AMBER AND WHITE max. 45mA +25C * SOME MORE MODULES WITH SAME MECHANIC AND SAME PINOUT: DOTMATRIX 1x8, 2x16, 4x20 AND 128x64, 240x128 WITH LARGER OUTLINE * NO SCREWS REQUIRED: SOLDER ON IN PCB ONLY * DETACHABLE VIA 9-PIN SOCKET EA B200-9 (2 PCS. REQUIRED) * OPERATING TEMPERATURE RANGE 0~+50C OR * -20~+70C OPERATING TEMP. WITH BUILT-IN TEMP. COMP. CIRCUIT ORDERING INFORMATION LCD GRAPHIC MODULE 122x32, WITH BACKLIGHT Y/G EA DIP122-5NLED Y/G FOR -20~+70C OPERATING TEMP. RANGE EA DIP122-5HNLED BLUE-WHITE FOR -20~+70C, LOW POWER EA DIP122B-5NLW AMBER FOR -20~+70C EA DIP122J-5NLA 9-PIN SOCKET, HEIGHT 4.3mm (2 PCS. REQUIRED) EA B200-9 HIGH-LEVEL-GRAPHICSCONTROLLER WITH RS-232C EA IC1520-1PGH Lochhamer Schlag 17 D-82166 Graefelfing Phone +49-(0)89-8541991 Fax +49-(0)89-8541721 www.lcd-module.de info lcd-module.de no more mounting requiredSpecifications may be changed without EA DIP122-5 prior notice. Printing error reserved Page 2 PINOUT Pin Symbol Level Function Pin Symbol Level Function 1 VSS L Power supply 0V (GND) 10 D3 H / L Display Data 2 VDD H Power supply +5V 11 D4 H / L Display Data 3 VEE - Contrast adjustment (-4 V) 12 D5 H / L Display Data 4 A0 H / L Command / Data 13 D6 H / L Display Data 5 R/W H / L H=Read, L=Write 14 D7 H / L Display Data, MSB 6 E1 H Enable left side 15 E2 H Enable right side 7 D0 H / L Display Data, LSB 16 RES L Reset 8 D1 H / L Display Data 17 A - LED Backlit+ (external RV ) 9 D2 H / L Display Data 18 C - LED Backlit - CONTROLLER PT6520 Graphic modules of EA DIP122-5 series do have 2 controller PT6520 (or compatible) built in: One for the left half of display and the other for the right one. From 61 columns each 0..60 are used only. PT6520 do not have any character mode, so all character has ATTENTION to be set by graphic. Many different fonts are optionally available on disk with part numer EA DISKFONT1520. A detailed description for all commands and interface timing *) handling precautions you will find at the user manual for PT6520 . Code Instructions Function A0 RD WR D7 D6 D5 D4 D3 D2 D1 D0 Display ON/OFF 0 1 0 1 0 1 0 1 1 1 0/1 Turns Display on or off. 0=OFF 1=ON Display start Specifies RAM line corresponding to top Display start line 0 1 0 1 1 0 address (0 - 31) of display. Page Set page address 0 1 0 1 0 1 1 1 0 Sets display RAM page. (0-3) Set Column address 0 1 0 0 Column address (0 - 79) Sets display RAM column address. O Read the following status: R B N A BUSY: 1=Busy 0=Ready E U / Read Status 0 0 1 D S 0 0 0 0 ADC: 1=CW output 0=CCW output S O C E ON/OFF: 1=Display off 0=Display on Y F T RESET: 1=Being reset 0=Normal F Write display data 1 1 0 Write data Writes data into display RAM. Read display data 1 0 1 Read data Reads data from display RAM. Select ADC 0 1 0 1 0 1 0 0 0 0 0/1 0=CW output 1=CCW output Selects static driving operation. Static drive ON/OFF 0 1 0 1 0 1 0 0 1 0 0/1 0=Normal driving 1=Static drive Select duty 0 1 0 1 0 1 0 1 0 0 0/1 Select duty cycle. 0=1/16 1=1/32 Read-Modify-Write 0 1 0 1 1 1 0 0 0 0 0 Read-modify-write ON End 0 1 0 1 1 1 0 1 1 1 0 Read-modify-write OFF Reset 0 1 0 1 1 1 0 0 0 1 0 Software reset. *)