EA KIT120-5 8.2000 CONTROL PANEL WITH FONTS, GRAPHICS COMMANDS AND MACROS EA KIT120-5LEDTP Dimensions 77x54mm TECHNICAL DATA * LCD GRAPHICS DISPLAY WITH DIVERSE GRAPHICS FUNCTIONS AND FONTS * 120x32 PIXELS WITH LED BACKLIGHT GN/GB * FONT ZOOM FROM 3mm VIA 8mm UP TO 20mm * SNAP-IN HOUSING FOR EXTREMELY EASY INSTALLATION * LED BACKLIGHTING SWITCHABLE VIA SOFTWARE COMMAND * SUPPLYV OLTAGE 5V / typ. 23mA (LED ON: 180mA) OR OPTIONALLY 9..36V * RS-232 WITH BAUD RATES FROM 1200 TO 115200 * POSITIONING ACCURATE TOTHE PIXEL WITH ALL FUNCTIONS * PROGRAMMING BY MEANS OF HIGH-LEVEL LANGUAGE-TYPE COMMANDS: * STRAIGHT LINE, POINT, AREA, AND/OR/EXOR, BAR GRAPH... * UP TO 256 BITMAP GRAPHICS/ICONS STORABLE IN THE SYSTEM * UP TO 256 MACROS PROGRAMMABLE (32kB INCL. FONTS AND GRAPHICS) * COMBINATIONS OF TEXT AND GRAPHICS * 5 DIGITAL INPUTS AND 5 OUTPUTS * OPERATING TEMPERATURE -20..+70C, ON-BOARDTEMPERA TURE COMPENSATION ACCESSORIES * INTEGRATED TOUCH PANEL WITH 5x2 FIELDS (ANTI-GLARE, SCRATCH-RESISTANT) * FLOPPY DISK FOR MACRO PROGRAMMING (PC DOS): EA DISK240 ORDER DESIGNATION 120x32 DOTSWITH LED ILLUMINA TION GB/GN EA KIT120-5LED 120x32 DOTSWITH TOUCH PANEL, LED ILLUMINATION, GB/GN EA KIT120-5LEDTP SUPPLYV OLTAGE 9..36V INSTEAD OF 5V EA OPT-9/36V OPTOCOUPLER FOR THE 5 INPUTS AND OUTPUTS EA OPT-OPTO10 CABLE (1.5m) FOR CONNECTION TO 9-PIN SUB-D AND THE IO PORTS EA KV24-9B10 ZEPPELINSTRASSE 19 D-82205 GILCHING PHONE +49-8105-778090 FAX +49-8105-778099 EA KIT120-5 GENERAL The EA KIT120 is a fully assembled control and operating unit with a variety of integrated functions. The display has very compact dimensions and offers excellent supertwist contrast, which means the unit can be put into operation immediately. It is controlled via the standard RS-232 interface. In addition to complete graphics routines for display output, the graphics unit also contains a wide variety of fonts. Graphics commands similar to high-level language are used for programming. There is no longer any need for the time-consuming programming of character sets and graphics routines. The ease of use offered by macros and input via touch panel make it a real power display. To install it, you simply insert it into the opening in the front panel. HARDWARE The graphics unit is designed to work with an operating voltage of +5V. A supply voltage of 9..36V is also possible. Serial asynchronous data transfer is carried out in RS-232 format. The transmission format is set permanently to 8 data bits, 1 stop bit, and no parity. Rates between 1200 baud and 115,200 baud can be set using a PC. RTS and CTS handshake lines are available. Data format: TOUCH PANEL The EA KIT120-5LEDTP version is equipped with an integrated touch panel. You can make entries by touching the display. The labeling of the keys is flexible and can also be changed during runtime (different languages, icons). The drawing of the individual keys and the labeling or grouping of several fields is handled by the integrated software. SOFTWARE The operating unit is programmed by means of commands, such as Draw a rectangle from (0,0) to (64,15). No additional software or drivers are required. Strings can be placed with pixel accuracy. Text and graphics can be combined at any time. Up to 16 different character sets can be used. Each one can be zoomed from 2 to 4 times. When the 2-times zoom is used with the largest character set (16x8), the words and numbers displayed will fill the screen (= 16x32). ACCESSORIES Floppy disk for creating macros and setting the baud rate *) A floppy disk (EA DISK240 ) is required for macro programming. This converts the commands entered in a text file into a code that can be read by the graphics unit, and programs them into the EEPROM. If you require a different baud rate to the factory setting of 9600 baud, you need the floppy disk again. Cable for PC To enable simple connection to PCs (macro programming), we provide a 1.5m cable and a 9-pin SUB- D female connector. Simply insert it into COM 1 or COM 2 and get started. There is also a 10-pin socket connector for the 5 inputs and outputs (with C-MOS level) for this cable. *) also available on the Internet at