EA KIT129-6 6.2005 CONTROL PANEL WITH FONTS, GRAPHICS COMMANDS AND MACROS EA KIT129J-6LWTP EA KIT129-6LWTP Dimensions 75x60x24mm Viewing area 61x 38 mm TECHNICAL DATA * LCD GRAPHIC DISPLAYWITH VARIOUS GRAPHIC FUNCTIONS AND BUILT IN FONTS * 128x64 PIXELS WITH LED ILLUMINATION, BLUE NEGATIVE OR * BLACK AND WHITE WITH WHITE LED-BACKLIGHT * POWER SUPPLY 5V/170mA OR 9~35V OPTIONALLY * RS-232 WITH BAUDRATES 1,200..115,200 BD * 5 FONTS BUILT IN, EVEN WITH 90 ROTATION FOR VERTICALLY USE * FONT ZOOM (double size to 8-times) UP TO 35mm CHARACTER SIZE * POSITIONING ACCURATETO THE PIXEL WITH ALL FUNCTIONS * PROGRAMMING BY MEANS OF HIGH-LEVEL LANGUAGE-TYPE COMMANDS: * STRAIGHT LINE, POINT, AREA, AND/OR/EXOR, BAR GRAPH... * UP TO 256 MACROS PROGRAMMABLE * COMBINATION OF TEXT AND GRAPHICS ALL THE TIME * BUILT IN SOFTWARE SUPPORTSTOUCH PANEL * OPERATING TEMPERATURE RANGE -20..+70C, STORAGE -30..+70C ACCESSORIES * WITH TOUCH PANEL 5x3 AREAS (ANTI-GLARE AND SCRATCH-PROOF) * FLOPPY DISK FOR MACRO PROGRAMMING (PC DOS/WIN) EA DISK240 * CABLE (1.5m) FOR CONNECTION TO 9-PIN SUB-D (RS-232 FEMALE) EA KV24-9B ORDERING INFORMATION 128x64 WITH TOUCH PANEL 5x3, LED-B./L. BLUE-WHITE EA KIT129-6LWTP 128x64 DOTS WITHOUT TOUCH PANEL EA KIT129-6LW 128X64 DOTS BLACK AND WHITE WITH TOUCH PANEL EA KIT129J-6LWTP SUPPLYV OLTAGE 9~35VDC INSTEAD OF 5V EA OPT-9/35V MOUNTING BEZEL, MADE OF BLACK ANODIZED ALUMINIUM EA 0FP129-6SW ZEPPELINSTRASSE 19 D-82205 GILCHING PHONE +49-8105-778090 FAX +49-8105-778099 EA KIT129-6 GENERAL The EA KIT129 graphics kit is a fully assembled control and operating unit with a variety of integrated functions. The display has very compact dimensions and offers excellent super-twist contrast, which means the unit can be put into operation immediately. It is controlled via the standard RS-232 or RS-422 interface. In addition to complete graphics routines for display output, the graphics kit also contains a wide variety of fonts. Graphics command similar to those used in high-level programming languages are used for programming. There is thus no longer any need for the time-consuming programming of character sets and graphics routines. The ease of use offered by macros and input via touch panel make it a real power display. HARDWARE The graphics kit is designed for an operating voltage of +5V. A supply voltage of 9..35V is also possible. Serial asynchronous data transfer is carried out in RS-232 format. The transmission format is set permanently to 8 data bits, 1 stop bits, and no parity. A transimssion rate of between 1,200 and 115,200 baud can be selected by means of DIP switches. RTS and CTS handshake lines are available. Data format: TOUCH PANEL The EA KIT129 versions are equipped with an integrated touch panel. You can make entries and choose menu settings by touching the display. The labeling of thekey is flexible and can also be changed during runtime (different languages, icons). The drawing of the individualkey and the labeling or grouping of several fields is handled by the integrated software. SOFTWARE The graphic kits are programmed by means of commands such as Draw a rectangle from (0,0) to (64,15). No additional software or drivers are required. Strings can be placed with pixel accuracy. Text and graphics can be combined at any time. Up to 16 different character sets can be used. Thus, when the 8-times zoom is used with the largest character set (8x16), the words and numbers fill the screen (128x64). CONTRAST ADJUSTMENT Contrast will be adjusted via built in potentiometer. Thanks to the onboard special temperature compensation circuit there s no need for any further adjustment, even temperature changes over the whole range of -20~+70C. BLUE-WHITE AND BLACK&WHITE (DIFFERENCE) The blue-white version EA KIT129-6LWTP is recommanded for all indoor-applications with and without any room illumination. The black&white FSTN-version EA KIT129J-6LWTP was specially developed for outdoor-applications. This kind of display can be read even under extrem bright sunlight conditions. It can be used without backlight also (even in direct sunlight ). ACCESSORIES Floppy disk for creating macros *) A floppy disk (EA DISK240) is required for macro programming . This converts the commands entered in a text file into a code that can be read by the graphics kit, and programs them into the EEPROM. Cable for PC To enable simple connection to PCs (macro programming), we provide a 1.5m cable and a 9-pin SUB-D female connector (EA KV24-9B). Simply insert it into COM 1 or COM 2 and get started. *) Also on the Internet: