EA KIT320-8 Aug. 2004 5,7 LCD CONTROL PANEL WITH TOUCH PANEL EA KIT320-8CTP Dim. 153x120mm TECHNICAL DATA * 5.7 LCD GRAPHICS DISPLAY WITH DIVERSE GRAPHICS FUNCTIONS AND FONTS * 320x240 PIXELS WITH CFL ILLUMINATION, BLUE NEGATIVE (RECOMMENDED) * 320x240 PIXELS WITH LED ILLUMINATION, WHITE, BLACK CHAR. FSTN * FONT ZOOM FRO Mappro x. 2mm TO approx. 80mm, ROTATABLE in 90 STEPS * SUPPLY +5V2% 500mA(CFL)/400mA(LED) OR OPTIONALLY +9..35V * RS-232 OR OPTIONALLY RS-422 WITH BAUD RATES OF 2,400 TO 115,200 * POSITIONING ACCURATE TOTHE PIXEL WITH ALL FUNCTIONS * STRAIGHT LINE, POINT, AREA, AND/OR/EXOR, BAR GRAPH... * CLIPBOARD FUNCTIONS, PULL-DOWN MENUS * UP TO 256 IMAGES STORABLE INTERNALLY * UP TO 1024 MACROS PROGRAMMABLE (FLASH WITH 480 KB) * ILLUMINATION SWITCHABLE BY MEANS OF SOFTWARE * COMBINATIONS OF TEXT AND GRAPHICS, FLASHING ATTRIBUTES, INVERTED * ANALOG TOUCH PANEL: VARIABLE GRID WITH 10x8 FIELDS, FOR EXAMPLE * FREELY DEFINABLE KEYS AND SWITCHES * MENUS AND BAR GRAPH CAN BE SET BY TOUCH * DOT-MATRIX DISPLAY CAN BE CONNECTED DIRECTLY AS SECONDARY DISPLAY ORDER DESIGNATION 320x240 DOTS 5.7 WITH CFL ILLUMINATION, BLUE NEGATIVE EA KIT320-8CTP AS ABOVE, BUTWITHOUT TOUCH PANEL EA KIT320-8C 320x240 DOTS, WHITE LED ILLUMINA TION, POSITIVE MODE, FSTN EA KIT320-8LWTP AS ABOVE FSTN, BUTWITHOUT TOUCH PANEL EA KIT320-8LW OPTIONS / ACCESSORIES SUPPLY +9..35V= INSTEAD OF +5V= EA OPT-9/35V RS-422 INTERFACE INSTEAD OF RS-232 EA OPT-RS4224 OPTOCOUPLER ONBOARD FOR 8 INPUTS AND OUTPUTS EA OPT-OPTO16 ALUMINUM MOUNTING BEZEL, ANODIZED MATT BLACK EA 0FP320-8SW ALUMINUM MOUNTING BEZEL, ANODIZED BLUE EA 0FP320-8BL CABLE (1.5m) FOR CONNECTING TO 9-PIN SUB-D (RS-232 FEMALE) EA KV24-9B FLOPPY DISK FOR MACRO PROGRAMMING (PC WIN95/98/2K) EA DISK320 ZEPPELINSTRASSE 19 D-82205 GILCHING PHONE +49-8105-778090 FAX +49-8105-778099 EA KIT320-8 GENERAL The EA KIT320 is a fully assembled control and operating unit with a variety of integrated functions. The display has very compact dimensions and offers excellent super-twist contrast, which means the unit can be put into operation immediately. It is controlled via the standard RS-232 or RS-422 interface. In addition to complete graphics routines for display output, the operating unit also contains a wide variety of fonts. Graphics commands similar to high-level language are used for programming. There is no longer any need for the time-consuming programming of character sets and graphics routines. The ease of use offered by macros and input via touch panel make it a real power display. HARDWARE The operating unit is designed to work with an operating voltage of +5V. A supply voltage of 9..35V is also possible. Serial asynchronous data transfer is carried out in RS-232 or RS-422 format. The transmission format is set permanently to 8 data bits, 1 stop bit, and no parity. Rates between 2,400 baud and 115,200 baud can be selected by means of DIP switches. RTS and CTS handshake lines are available. Data format: TOUCH PANEL The EA KIT320-8CTP and -8LWTP versions are equipped with an integrated touch panel. You can make entries and menu or bar graph settings by touching the display. The labeling of the keys is flexible and can also be changed during runtime (different languages, icons). The drawing of the individual keys and the labeling is handled by the integrated software. SOFTWARE The operating unit is programmed by means of commands, such as Draw a rectangle from (0,0) to (64,15). No additional software or drivers are required. Strings can be placed with pixel accuracy. Flashing attributes can be assigned as often as you like for graphics as well. Text and graphics can be combined at any time. Up to 16 different character sets can be used. Each one can be zoomed from 2 to 8 times. With the largest character set, the words and numbers displayed will fill the screen. ACCESSORIES Floppy disk for macro creation *) A floppy disk (EA DISK320) is required for macro programming . This converts the commands entered in a text file into a code that can be read by the operating unit, and programs them into the FLASH PROM. Cable for PC To enable simple connection to PCs (specifically for macro programming), we provide an optional 1.5m cable and a 9-pin SUB-D female connector (EA KV24-9B). Simply insert it into COM 1 or COM 2 and get started. Note: The cable is not suitable for the RS-422 version EA OPT-RS4224. *) also available at