EA LED94x67-A Display Visions

available in low quantities flat: 6.5mm with LED b./l. mounted Issue 6.2020 DOGXL240-7 GRAPHIC 240X128 INCL. CONTROLLER UC1611S EA DOGXL240W-7 + EA LED94X67-W EA DOGXL240B-7 + EA LED94X67-W EA DOGXL240W-7 + EA LED94X67-A TECHNICAL DATA * CONTROLLER UC1611s WITH INTEGRATED GRAFIC-RAM * HIGH-CONTRAST LCD SUPERTWIST DISPLAY (STN AND FSTN) WITH 15m DOT GAP * OPTIONAL LED BACKLIGHTS IN VARIOUS COLORS * 240x128 DOTS (CORRESPONDS TO 16 x40 CHARS OR 8X20 LARGE CHARS) * POWER SUPPLY: SINGLE SUPPLY 2,7..3,3V (typ. 900 A) * NO ADDITIONAL VOLTAGES REQUIRED 2 * THREE DIFFERENT INTERFACES: 3-WIRE SPI, 4-WIRE SPI AND I C * OPERATING TEMPERATURE RANGE -20..+70C (STORAGE -30..+80C) * LED BACKLIGHTING 10 to 150mA * NO MOUNTING REQUIRED: SIMPLY SOLDER ONTO PCB ORDERING CODE GRAPHICS DISPLAY, 240x128, 94x67mm EA DOGXL240x-7 x: W = white background (FSTN pos. transflective) B = blue background (STN neg. transmissive) S = black background (FSTN neg. transmissive) N = superwhite background (FSTN pos. reflective, cannot be backlit) LED BACKLIGHT, WHITE EA LED94X67-W LED BACKLIGHT, AMBER EA LED94X67-A LED BACKLIGHT, DUO COLOR GREEN/RED EA LED94X67-GR ACCESSORIES USB TEST BOARD FOR PC (WINDOWS 2000, XP, VISTA) EA 9780-4USB TOUCH PANEL, 4-WIRE, ANALOG, STICK-ON EA TOUCH240-3 ZIF CONNECTOR FOR TOUCH PANEL, BOTTOM CONTACT EA WF100-04S 10 CHARACTER SETS e.g. 6x8,8x8,8x16,CYRILLIC, FONT EDITOR EA USBSTICK-FONT SOCKET 4.8mm HEIGHT (2 pcs. ARE NECCESSARY) EA FL-20PDOGXL240-7 GRAPHIC PINOUT The EA DOGXL240-7, a 240x128 dots graphics Pin Symbol Level Function Pin Symbol Level Function 1 NC (A1+: LED backlight) 21 VB0+ - Voltage Converter display, is a new addition to ELECTRONIC 2 NC (A2+: LED backlight) 22 VB1+ - Voltage Converter 3 NC (A3+: LED backlight) 23 VB1- - Voltage Converter ASSEMBLYs EA DOG series. It, too, has pins that 4 24 VB0- - Voltage Converter allow it to be mounted quickly and easily. 5 25 VA0+ - Voltage Converter 6 26 VA1+ - Voltage Converter 7 27 VA1- - Voltage Converter CONTRAST ADJUSTMENT 8 28 VA0- - Voltage Converter 9 29 VLCD - Pow er LC Drive The contrast can be set by means of a command 10 30 VDD H Pow er Supply +2,7..3,3V 11 31 VSS for all the displays in theEA DOGXL- Series. iThe L Pow er Supply 0V (GND) 12 32 VSS contrast setting of the display must be set once 13 33 BM0 H / L Config Serial Interface 14 34 CD H/ L L= Command, H= Data by the software, and is then kept constant 15 35 CS1 (A3) H Chip Select (high low ) 16 36 CS0 (A2) L Chip Select (active low ) throughout the entire operating temperature range 17 37 RST L Reset (active low ) 18 NC (C1-: LED backlight) 38 SCK (D0) H/ L Serial Clock (-20..+70C), thanks to the integrated temperature 19 NC (C2-: LED backlight) 39 SDA (D3) H/ L Serial Data compensation. 20 NC (C3-: LED backlight) 40 D13 H/ L Config Serial Interface LED-BACKLIGHT 3 different variants are available for individual backlighting: white, amber and a duo-color green/red version. With the amber backlight, there are 3 separate LED paths containig 5 parallel LEDs, that can be switched in parallel or in series to suit the systems voltage. With the white backlight, there are 3 separate LED paths containig 3 LEDs in series. To operate the backlight, we recommend a current source (e.g. CAT4238TD). The duo-color backlight has common anode and two terminals for driving the red and / or the green color. The operating life of the amber and green/red backlights is 100,000 hours. The LEDs of the white backlight are high qualitiy NICHIA LEDs. To achieve the life-time of 100k hours, we recommend dimming or switching them off whenever possible. Important: Do never connect the backlight LEDs directly to a 5 V/3.3 V supply as this will immediately destroy the LEDs. Always use a current source. Please note that derating applies at temperatures exceeding +25C. Forward LED backlight Current voltage (each path ) max. typ white 9.6 V 15 mA EA LED94x67-W Applikationsbeispiel EA LED94X67-W Forward Limiting resistor Current LED backlight voltage (ohm) (each path ) typ max 3,3 V 5 V amber 2.1 V 100 mA 12 29 EA LED94x67-A Limiting Forward Current resistor LED backlight voltage (ohm) (each color) typ max 5 V full color 2.1 V 120 mA 25 EA LED94x67-GR Page 2 Printing and typographical errors reserved. ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice.