EA KIT240-7 June 2004 CONTROL PANEL WITH FONTS, GRAPHICS COMMANDS AND MACROS EA KIT240-7CTP Dimensions 144x104mm TECHNICAL DATA * LCD GRAPHIC DISPLAY WITH MANY GRAPHICS FUNCTIONS AND FONTS * 240x128 PIXELS WITH CFL ILLUMINATION, BLUE NEGATIVE (RECOMMENDED) * 240x128 PIXELS WITH LED ILLUMINATION YELLOW/GREEN * 240x128 PIXELS WITH WHITE LED ILLUMINATION, BLUE NEGATIVE MODE * INTEGRATED TOUCH PANEL WITH 10x6 FIELDS (ANTI-GLARE, SCRATCH-RESISTANT) * FONT ZOOM OF approx. 2mm VIA approx. 5mm UP TOapprox. 50mm * SUPPLY V OLTAGE 5V/700mA (CFL)/1200mA (LED) OR OPTIONALLY 9..35V * RS-232 OR ALTERNATIVELY RS-422 WITH BAUD RATES 1200..115200 * POSITIONING ACCURATETO THE PIXEL WITH ALL FUNCTIONS * PROGRAMMING BY MEANS OF HIGH-LEVEL LANGUAGE-TYPE COMMANDS: * STRAIGHT LINE, POINT, AREA, AND/OR/EXOR, BAR GRAPH... * UP TO 256 MACROS PROGRAMMABLE * 4 CLIPBOARD FUNCTIONS, PULL-DOWN MENUS With integrated bezel ACCESSORIES * INTEGRATED ALUMINUM BEZEL: BLACK (EA 0FP240-7SW) OR BLUE (-7BL) * FLOPPY DISK FOR MACRO PROGRAMMING (PC DOS): EA DISK240 * CABLE (1.5m) FOR CONNECTION TO 9-PIN SUB-D (RS-232 FEMALE): EA KV24-9B ORDER DESIGNATION 240x128 DOTSWITH TOUCH PANEL, CFL ILLUM., BLUE NEGATIVE EA KIT240-7CTP 240x128 DOTSWITH TOUCH PANEL, LED ILLUMINATION, Y/G EA KIT240-7LEDTP 240x128 DOTSWITH TOUCH PANEL, LED ILLUMINATION, WHITE EA KIT240-7LWTP 240x128 DOTSWITH CFL ILLUMINA TION, BLUE NEGATIVE EA KIT240-7C 240x128 DOTSWITH LED ILLUMINA TION, Y/G EA KIT240-7LED 240x128 DOTSWITH LED ILLUMINA TION, WHITE EA KIT240-7LW SUPPLYV OLTAGE 9..35V INSTEAD OF 5V EA OPT-9/35V RS-422 INTERFACE INSTEAD OF RS-232 EA OPT-RS4224 8 DIGITAL INPUTS AND 8 OUTPUTS WITH OPTOCOUPLER EA OPT-OPTO8I8O ZEPPELINSTRASSE 19 D-82205 GILCHING PHONE +49-8105-778090 FAX +49-8105-778099 EA KIT240-7 GENERAL The EA KIT240 graphics kit is a fully assembled control and operating unit with a variety of integrated functions. The display has very compact dimensions and offers excellent super-twist contrast, which means the unit can be put into operation immediately. It is controlled via the standard RS-232 or RS-422 interface. In addition to complete graphics routines for display output, the graphics kit also contains a wide variety of fonts. Graphics command similar to those used in high-level programming languages are used for programming. There is thus no longer any need for the time-consuming programming of character sets and graphics routines. The ease of use offered by macros and input via touch panel make it a real power display. DISPLAYVERSIONS CFL-Backlight EA KIT240-7CTP: blue background with white characters. Extreme bright and with high contrast. Life time (MTBF) for backlight 10,000~20,000h. BAcklight unit is as a spare part available (ordering code EA CFL240-7). Current consumption typ. 450 mA. LED-Backlight EA KIT240-7LWTP: blue background with white characters. Bright and with high contrast. Life time for half of brightness: 20,000~30,000h. Current consumption typ. 250 mA. LED-Backlight EA KIT240-7LEDTP: Yellow/green background with black characters. Good contrast, Life time (MTBF) 100,000h. Current consumption typ. 1200 mA. HARDWARE The graphics kit is designed for an operating voltage of +5V. A supply voltage of 9..35V is also possible. Serial asynchronous data transfer is carried out in RS-232 or RS-422 format. The transmission format is set permanently to 8 data bits, 1 stop bits, and no parity. A transimssion rate of between 1200 and 115,200 baud can be selected by means of DIP switches. RTS and CTS handshake lines are available. Data format: TOUCH PANEL The EA KIT240-7CTP and -7LEDTP versions are equipped with an integrated touch panel. You can make entries and choose menu settings by touching the display. The labeling of thekey is flexible and can also be changed during runtime (different languages, icons). The drawing of the individualkey and the labeling or grouping of several fields is handled by the integrated software. SOFTWARE The graphic kits are programmed by means of commands such as Draw a rectangle from (0,0) to (64,15). No additional software or drivers are required. Strings can be placed with pixel accuracy. Text and graphics can be combined at any time. Up to 16 different character sets can be used. Thus, when the 8-times zoom is used with character set 16x8, the words and numbers fill the screen. ACCESSORIES Front panel for mounting A front panel made of anodized aluminum is available as an accessory. This allows the graphics kit to be mounted without any screws visible. Installing it is child s play. The EA 0FP240-7 front panel is available in black (SW) and blue (BL). Floppy disk for creating macros *) A floppy disk (EA DISK240) is required for macro programming . This converts the commands entered in a text file into a code that can be read by the graphics kit, and programs them into the EEPROM. Cable for PC To enable simple connection to PCs (macro programming), we provide a 1.5m cable and a 9-pin SUB-D female connector (EA KV24-9B). Simply insert it into COM 1 or COM 2 and get started. Note: The cable is not suitable for the RS-422 version (EA OPT-RS4224). 2 *) Also on the Internet: