Soldering Solder - Fume Page 1 of 5 Soldering Solder - Fume Distelkamp - Electronic Ernst Christmann Str. 8, D-67659 Kaiserslautern Phone: 49-631-78319, fax,: 49-631-78399, e-mail,: dikamp aol.com Solder fume and pollutant absorbers For the sake of your health. Should not be missing at any workstation. By using our absorbers, poisonous and smelly gases, vapors, aerosols, and floating particles are vacuumed at the place of formation. Direct skin-and breath-contact as well as diffusion into the air is prevented. The exhaust air, cleaned through active carbon, is supplied back to the area again. Heat-loss and drafts are therefore eliminated. As opposed to installing absorbing stations, these absorbers have the following advantages: z The workstation-formation remains flexible, because the appliances are not permanently installed. z No maintenance costs originate, since cleaning of the vacuum hoses is eliminated. z If one unit should fail, down-time of the entire installation does not occur. z Lower energy-consumption. z The units have proven themselves for years a thousandfold. Our absorbers are recommended by the occupation-cooperative, the institute for labor safety of the Federal-institution of labor, the technical labor safety service for Federal employees, etc Due to equal production of pollutant and solder vapor absorbers for virtually all industry-branches we can produce these units inexpensively. That means low initial purchase cost and overhead. Areas of Application: z Chemical industry z Drug industry z Hospital, laboratory-doctor, z Drugstores z Dental laboratory z Electronics industry z Solders in metal-processing z Plastic-processing z Glues and solvent vapors z Goldsmiths z Restoration z Schools and universities Soldering Solder - Fume Page 2 of 5 z Tiffany technique Solder Fume Absorber LDA 11 Useful appliance with adjustable inclination, that fully suffices average requirements with smaller soldering jobs. Based on the attractive price and the practical construction, this absorber is suitable for schools, home industry and training. The appliance comes with its own mount or stand. Power requirements::220/240V/18W, air throughput:160m/h, noise level: 40dBA, housing: anodized aluminum, dimensions: 150x140x55mm Order-numbers: z LDA 11 Solder Fume Absorber: EUR 54,80 z LDF 1 pack replacement filters (6 pcs) EUR 12,22 +Sales Tax. Solder Fume Absorber LDA 1 A well proven unit, with robust aluminum-casing and pierced front-