Color Dissipative Top Layer DUAL LAYER RUBBER MATTING Specifications Standard Document Meets Requirements of: ANSI/ESD S20.20 Worksurface Electrical Properties Typical Values Test Procedures/Methods Color Dissipative Top Layer 6 9 Rtt Resistance: 1 x 10 to < 1 x 10 ohms ANSI/ESD S4.1 and ESD TR53 Conductive Bottom Layer 6 9 Rtg Resistance: 1 x 10 to < 1 x 10 ohms ANSI/ESD S4.1 and ESD TR53 Black Conductive Bottom Layer 6 Rtt Resistance: < 1 x 10 ohms ANSI/ESD S4.1 and ESD TR53 Grounding & Cleaning 6 Rtg Resistance: < 1 x 10 ohms ANSI/ESD S4.1 and ESD TR53 If the material is used on top of an already properly grounded surface, grounding hardware may not be necessary. Where no Physical Properties properly grounded surface is available, grounding hardware is required to provide a path-to-ground. Rtg compliance verification Thickness: 0.060 measurements must be made as outlined in ESD TR53 with a Colors*: Light Blue, Grey, Dark Blue surface resistance meter. Tolerances See Tech Bulletin TB-7000 for Reztore Surface & Mat Cleaner Width .250 Application Instructions. Length .250 every 1 linear foot of running material. Thickness .005 Limited Warranty: *Color and texture may vary between lots Desco warrants for one year that Dual Layer Rubber matting products will be free of defects in materials and workman ship. Damage to matting Use With Continuous Monitor caused by misuse of any kind, including using inappropriate cleaners is This material may be used with ESD workstation continuous monitors. not covered by Desco Limited Warranty. For product listings, Click Here RoHS 3, REACH, and Conflict Minerals Statement See the Desco Industries RoHS 3, REACH, and Conflict Minerals Statement: