Tolerance for length dimensions: +/- 0.1 mm Available from stock. Delivery times for intermediate lengths and special versions upon request. Standard range spacer sleeves Brass, nickel plated Order No. Execution Material Diameter D (mm) Diameter d (mm) Standard lengths in mm 314 / 2.1 x (length) DH Brass 4.0 2.1 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 315 / 2.6 x DH Brass 5.0 2.6 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 316 / 3.2 x DH Brass 6.0 3.2 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 18, 20, 25, 30 318 / 4.3 x DH Brass 8.0 4.3 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 18, 20, 25, 30 3110 / 5.3 x DH Brass 10.0 5.3 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 18, 20, 25, 30 29 E-Mail: mail dremec.de Internet: www.dremec.de Portal: www.dremec.netX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Standoffs & Spacers category: Click to view products by Dremec manufacturer: Other Similar products are found below : M0513-3-N M0516-3-N M0517-3-N M0518-3-N M0521-3-N M0524-3-N M0532-35-AL M0532-35-N M0543-4-AL M0544-35-N M0544- 3-N M0545-3-AL M0553-3-N M0564-4-N M0608-5-SS M0609-5-SS M0610-35-AL M0613-3-N M0651-5-SS M0653-35-N M0654-4-SS M0655-5-AL M0655-5-N M0660-4-AL M0660-4-N M0670-35-N M0671-5-N M0671-5-SS M0722-5-N M0725-6-N M0731-4-N M0904- B-25-AL M1273-2545-AL M1273-3005-AL M1303-3506-AL M1307-3506-AL M1313-3005-N M1313-4007-AL M1314-3005-AL M1314- 3005-SS M1315-3005-SS M1315-4007-N M1317-3506-AL M1317-4007-SS M1318-3005-SS M1320-3005-AL M1320-3005-N M1321- 3005-SS M1321-4007-AL M1322-4007-N