REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add flat package. Change CAGE code to 67268. 87-10-09 R. P. EVANS B Add device type 02. Editorial changes throughout. 93-09-22 M. A. FRYE C Drawing updated to reflect current requirements. - ro 02-06-26 R. MONNIN THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. REV SHEET REV SHEET REV STATUS REV C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 PMIC N/A PREPARED BY DONALD R. OSBORNE DEFENSE SUPPLY CENTER COLUMBUS CHECKED BY COLUMBUS, OHIO 43216 STANDARD D. A. DiCENZO 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 5962-87516 01 C X Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 521 Dual differential comparator 02 522 Dual differential comparator (open collector) 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style C GDIP1-T14 or CDIP2-T14 14 Dual-in-line D GDFP1-F14 or CDFP2-F14 14 Flat pack 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Positive supply voltage (+V) ............................................................. +7 V dc Negative supply voltage (-V) ............................................................ -7 V dc Differential input voltage (V ) ........................................................ 6.0 V dc IDR Input voltage (V ): IN Common mode .............................................................................5 V dc Strobe / gate .................................................................................+5.25 V dc Maximum power dissipation (P ) ..................................................... 600 mW 1/ D Storage temperature range (T ) .................................................. -65C to +150C STG Lead temperature (soldering, 10 seconds) ...................................... +300C Junction temperature (T ) ................................................................ +150C J Thermal resistance, junction-to-case ( ) ...................................... See MIL-STD-1835 JC 1.4 Recommended operating conditions. Positive supply voltage range (+V) ................................................... +4.5 V to +5.5 V Negative supply voltage range (-V) .................................................. -4.5 V to 5.5 V Common mode voltage range (V ) ............................................... 3 V dc ICR Ambient operating temperature range (T ) ...................................... -55C to +125C A 1/ Must withstand the added P due to short circuit test e.g., I . D OS SIZE STANDARD 5962-87516 A MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS REVISION LEVEL SHEET COLUMBUS, OHIO 43216-5000 C 2 DSCC FORM 2234 APR 97