REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED Add CAGE number 34335 as approved source for 01 device. Add 89-08-23 M. A. Frye A CAGE number 66579 for devices 01 through 04. Add device 04. Delete footnote 4/ from t condition block. Add footnote 4/ to t QLQV EHQZ condition block. Remove test condition C. Make editorial changes to margin test method B. Make editorial changes to power dissipation. Add case outline letter and device type 05 for vendor CAGE number 93-02-02 M. A. Frye B 1FN41. Add test condition C to 4.2 and 4.3.2. Add vendor CAGE number 34649 to the drawing as a source for device types 01XX, 02XX, and 03XX. Add vendor CAGE 34335 for devices 04XX, 04YX, 05XX, and 05YX. Removed vendor CAGE number 60991 from drawing. Editorial changes throughout. Make changes to paragraph 1.3, Table I, and AC waveforms. Add 96-03-01 M. A. Frye C paragraph 3.11 and remove paragraph 4.2c. Updated boilerplate and Source Approval Bulletin. Add device types 06 - 14 to drawing along with CAGE number 65786 97-07-07 Raymond Monnin D as source of supply. Updated boilerplate. E Boilerplate update, part of 5 year review. ksr 06-09-11 Raymond Monnin REV SHEET REV E SHEET 15 REV STATUS REV E E E E E E E E E E E E E E OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Kenneth Rice DEFENSE SUPPLY CENTER COLUMBUS CHECKED BY COLUMBUS, OHIO 43218-3990 STANDARD 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN is as shown in the following examples: 5962 - 87648 01 X A Federal RHA Device Case Lead stock class designator type outline finish designator (see 1.2.1) (see 1.2.2) (see 1.2.4) (see 1.2.5) / / Drawing number For device classes Q and V: 5962 - 87648 01 Q X A Federal RHA Device Device Case Lead stock class designator type class outline finish designator (see 1.2.1) (see 1.2.2) designator (see 1.2.4) (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number 1/ Circuit function Access time 01,12 64K x 8-bit UVEPROM 150 ns 02,13 64K x 8-bit UVEPROM 200 ns 03,14 64K x 8-bit UVEPROM 250 ns 04,11 64K x 8-bit UVEPROM 120 ns 05,10 64K x 8-bit UVEPROM 90 ns 06 64K x 8-bit UVEPROM 70 ns 07 64K x 8-bit UVEPROM 55 ns 08 64K x 8-bit UVEPROM 45 ns 09 64K x 8-bit UVEPROM 35 ns 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1/ Generic numbers listed on the Standard Microcircuit Drawing Source Approval Bulletin at the end of this document and will also be listed in MIL-HDBK-103. SIZE STANDARD A 5962-87648 MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS REVISION LEVEL SHEET COLUMBUS, OHIO 43218-3990 E 2 DSCC FORM 2234 APR 97