REVISIONS LTR DESCRIPTION DATE (YR MO DAY) APPROVED A Add one vendor, CAGE 65786. Add device types 03 and 04. Add 88-10-25 M. A. Frye margin test, programming procedure, waveform, and flowchart for method B. Add case outline letter K. B AddChanges in accordance with NOR 5962-R103-92 91-12-24 M. A. Frye C Redraw with changes. Add device type 05 for vendor CAGE 65786. 93-03-23 M. A. Frye Changes to margin methods A and B. Add vendor CAGE 66759 as a source of supply for device types 01JX, 01LX, and 013X with vendor similar part number changes. Editorial changes throughout. D Made correction to paragraph 1.2.2 for case outline 3, under package 02-10-30 Raymond Monnin style change rectangular to square. Updated drawing to the latest format. Redrew entire document. -sld E Made correction to paragraph 1.2.1 and added additional vendor 02-12-16 Raymond Monnin similar PIN numbers for device types 03 and 05 on the Standard Microcircuit Drawing Bulletin. -sld F Boilerplate update and part of five year review. tcr 07-11-01 Robert M. Heber THE ORIGINAL FIRST PAGE OF THIS DRAWING HAS BEEN REPLACED REV SHEET REV SHEET REV STATUS REV F F F F F F F F F F F OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 PREPARED BY PMIC N/A Rick Officer DEFENSE SUPPLY CENTER COLUMBUS STANDARD COLUMBUS, OHIO 43218-3990 CHECKED BY MICROCIRCUIT Charles Reusing 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 5962-87650 01 J A Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function Access time 01 WS57C191-50, CY7C291-50 2K x 8 UV EPROM 50 ns 02 WS57C191-55 2K x 8 UV EPROM 55 ns 03 7C291-35, CY7C291-35, WS57C291C-35 2K x 8 UV EPROM 35 ns 04 WS57C191B-45 2K x 8 UV EPROM 45 ns 05 7C291A-25, WS57C291C-25 2K x 8 UV EPROM 25 ns 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style 1/ J GDIP1-T24 or CDIP2-T24 24 Dual-in-line K GDFP2-F24 or CDFP3-F24 24 Flat package L GDIP3-T24 or CDIP4-T24 24 Dual-in-line 3 CQCC1-N28 28 Square leadless chip carrier 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage range (V ) ............................................................ +4.5 V dc to +5.5 V dc CC Storage temperature range ........................................................... -65C to +150C Voltages on any pin with respect to ground ................................... -0.6 V dc to +7.0 V dc V with respect to ground .............................................................. -0.6 V dc to +14.0 V dc PP Power dissipation (P ) .................................................................... 550 mW 2/ D Lead temperature (soldering, 10 seconds) .................................... +300C ) ..................................... See MIL-STD-1835 Thermal resistance, junction-to-case ( JC Endurance ..................................................................................... 50 cycles/byte, minimum Data retention ................................................................................ 10 years, minimum 1.4 Recommended operating conditions. Case operating temperature range (T ) ........................................ -55C to +125C C 1/ Lid shall be transparent to permit ultraviolet light erasure. 2/ Must withstand the added P due to short circuit test (e.g., I ). D OS SIZE STANDARD 5962-87650 A MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS REVISION LEVEL SHEET COLUMBUS, OHIO 43218-3990 F 2 DSCC FORM 2234 APR 97