REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED 06-12-05 Raymond Monnin A Boilerplate update, part of 5 year review. ksr THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. REV SHEET REV SHEET REV STATUS REV A A A A A A A A A A OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 PMIC N/A PREPARED BY Gary L. Gross DEFENSE SUPPLY CENTER COLUMBUS CHECKED BY COLUMBUS, OHIO 43218-3990 STANDARD 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 5962-90658 01 J A Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function Acess time 01 57C43C-70 4K x 8-bit UVEPROM 70 ns 02 57C43C-55 4K x 8-bit UVEPROM 55 ns 03 57C43C-45 4K x 8-bit UVEPROM 45 ns 04 57C43C-35 4K x 8-bit UVEPROM 35 ns 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style J GDIP1-T24 or CDIP2-T24 24 Dual-in-line 1/ K GDFP2-F24 or CDFP3-F24 24 Flat pack 1/ L GDIP3-T24 or CDIP4-T24 24 Dual-in-line 1/ 3 CQCC1-N28 28 Square leadless chip carrier 1/ 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Voltage range on any pin with respect to ground.......................-0.6 V dc to +7.0 V dc V range with respect to ground ...............................................-0.6 V dc to +14.0 V dc pp Storage temperature range........................................................-65C to +150C Maximum power dissipation (P ) ..............................................1 W D Lead temperature (soldering, 10 seconds) ................................+300C Thermal resistance, junction-to-case ( ).................................See MIL-STD-1835 JC Junction temperature (T ) 2/ ......................................................+150C J Temperature (under bias) range................................................-55C to +125C 1.4 Recommended operating conditions. Supply voltage range (V )........................................................+4.5 V dc to +5.5 V dc CC Ground voltage (GND)...............................................................0 V dc Input high voltage (V ) ..............................................................2.0 V dc minimum IH Input low voltage (V ) ................................................................0.8 V dc maximum IL Case operating temperature range (T ).....................................-55C to +125C C 1/ Lid shall be transparent to permit ultraviolet light erasure. 2/ Maximum junction temperature shall not be exceeded except for allowable short duration burn-in screening conditions in accordance with method 5004 of MIL-STD-883. SIZE STANDARD 5962-90658 A MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS REVISION LEVEL SHEET COLUMBUS, OHIO 43218-3990 A 2 DSCC FORM 2234 APR 97