REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Change to military drawing format. Change from a suggested source 88-01-15 M. A. Frye drawing to an approved source drawing. Add CAGE 34335 and device type 02. Add case outline letters K, L, X, and 3. Change drawing CAGE to 67268. B Updated boilerplate. Removed programming specifics from drawing. 00-08-01 Raymond Monnin Separated source bulletin from body of drawing. - glg C Correction to marking paragraph 3.5, updated boilerplate paragraphs. 05-03-02 Raymond Monnin ksr D Boilerplate update, part of 5 year review. ksr 11-01-20 Charles F. Saffle THE ORIGINAL FIRST PAGE OF THIS DRAWING HAS BEEN REPLACED. CURRENT CAGE CODE 67268 REV SHEET REV SHEET D D D D D D D D D D REV STATUS REV OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 PREPARED BY PMIC N/A A. J. Foley DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 CHECKED BY STANDARD 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN shall be as shown in the following example: 79024 01 J A Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) shall identify the circuit function as follows: Device type Generic number Circuit Access time 01 1/ 1K x 8-bit power switched bipolar PROM 90 ns 02 1/ 1K x 8-bit power switched bipolar PROM 75 ns 1.2.2 Case outline(s). The case outline(s) shall be as designated in MIL-STD-1835, and as follows: Outline letter Descriptive designator Terminals Package style J GDIP1-T24 or CDIP2-T24 24 dual-in-line package K GDFP2-F24 or CDFP3-F24 24 flat package L GDIP3-T24 or CDIP4-T24 24 dual-in-line package X CQCC1-N32 32 rectangular chip carrier package 3 CQCC1-N28 28 square leadless chip carrier package 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage range ......................................................... -0.5 V dc to +7.0 V dc Address/enable Input voltages ......................................... -0.5 V dc to +5.5 V dc Address/enable Input current -30 mA dc to +5.5 mA dc Storage temperature range ............................................... -65C to +150C Lead temperature (soldering, 10 seconds) ....................... +300C Thermal resistance, junction-to-case ( ) ...................... See MIL-STD-1835 JC 1.4 Recommended operating conditions. Case operating temperature range (T ) ................................. -55C to +125C C Supply voltage range (V ) 4.5 V dc to 5.5 V dc CC 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. 1/ Generic numbers are listed on the Standard Microcircuit Drawing Source Approval Bulletin at the end of this document and will also be listed in MIL-HDBK-103. SIZE STANDARD 79024 A MICROCIRCUIT DRAWING DLA LAND AND MARITIME REVISION LEVEL SHEET COLUMBUS, OHIO 43218-3990 D 2 DSCC FORM 2234 APR 97