INCH-POUND MIL-M-38510/335C 9 January 2004 SUPERSEDING MIL-M-38510/335B 24 October 1984 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR ADVANCED SCHOTTKY TTL, QUADRUPLE, 2 INPUT OR GATES, MONOLITHIC SILICON Reactivated after 9 January 2004 and may be used for either new or existing design acquisition. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535 1. SCOPE 1.1 Scope. This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, quadruple, 2 input positive OR logic gate microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3). 1.2 Part or Identifying Number (PIN). The PIN should be in accordance with MIL-PRF-38535, and as specified herein. 1.2.1 Device types. The device types should be as follows: Device type Circuit 01 Quadruple, 2-input positive OR gate 1.2.2 Device class. The device class should be the product assurance level as defined in MIL-PRF-38535. 1.2.3 Case outlines. The case outlines should be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style A GDFP5-F14 or CDFP6-F14 14 Flat pack B GDFP4-14 14 Flat pack C GDIP1-T14 or CDIP2-T14 14 Dual-in-line D GDFP1-F14 or CDFP2-F14 14 Flat pack X CQCC2-N20 20 Square leadless chip carrier 2 CQCC1-N20 20 Square leadless chip carrier Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, or emailed to bipolar dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil. AMSC N/A FSC 5962 MIL-M-38510/335C 1.3 Absolute maximum ratings. Supply voltage range ............................................................................. -0.5 V dc to +7.0 V dc Input voltage range ................................................................................ -1.2 V dc at -18 mA to +7.0 V dc Storage temperature range .................................................................... -65 to +150C Maximum power dissipation, per device (P ) 1/ .................................... 85.3 mW D Lead temperature (soldering, 10 seconds) ............................................. +300C Thermal resistance, junction to case ( ): JC Cases A, B, C, D, X, and 2 ................................................................... (See MIL-STD-1835) Junction temperature (T ) 2/ ................................................................... 175C J 1.4 Recommended operating conditions. Supply voltage (V ) .............................................................................. 4.5 V dc minimum to CC 5.5 V dc maximum Minimum high level input voltage (V ) ................................................... 2.0 V dc IH Maximum low level input voltage (V ) .................................................... 0.8 V dc IL Normalized fanout (each output) 3/ : Low logic level .................................................................................. 33 maximum High logic level ................................................................................. 50 maximum Case operating temperature range (T ) ................................................. -55 to +125C C 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed. 2.2 Government documents. 2.2.1 Specifications and Standards. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATIONS MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard for Microelectronics. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines (Copies of these documents are available online at