Keeper LTC-7PN The LTC-7PN series was design specifically to be printed circuit board (PCB) compatible. With a low profile, prismatic shape, this battery is unique in the industry and a perfect match for space saving requirements. Available in 3 PCB and 1 surface mounting configurations, these cells provide high quality, high energy density, non-position sensitive solutions to your high density electronics power needs. LTC-7PN PRODUCT FEATURES Compliant with lead-free RoHS and WEEE TYPICAL LTC-7PN DISCHARGE CHARACTERISTICS AT VARIED TEMPERATURES EC directives. 3.9 3.8 Low profile, prismatic design. 3.7 3.6 3.5 Stainless steel construction provides corrosion 3.4 3.3 resistance, hermetic seal and structural integrity. 3.2 3.1 3.0 Years of low rate continuous use. 2.9 1 mA 10 uA 2.8 2.7 Stand-by use with 80% capacity retention after 2.6 2.5 15 years at room temperature. 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 x 10 x 100 x 1,000 x 10,000 DISCHARGE TIME (HOURS) Highly efficient utilization of valuable board space. HIGH TEMPERATURE OPERATION AT 75 C TEMPERATURE OPERATION AT 20 C Wave solderable (limit solder bath exposure to COLD TEMPERATURE OPERATION AT -20 C a maximum of 5 seconds). High energy density compared to other chemistries. DO YOU HAVE QUESTIONS No charging circuits required. Higher cell voltage allows for fewer cells and CONCERNING: high reliability. What size battery you need Flat discharge characteristics provide optimum What is passivation and its effects voltage regulation. What is the maximum rate of this cell Non-pressurized system allow for Any other technical question high temperature usage. If so, call our Engineers at 1-800-201-0215 or 1-417-625-1116 Ship unrestricted. IATA No. UN3090. for detailed technical information. Underwriters Laboratories recognized component. LITHIUM-THIONYL CHLORIDE BATTERIES Keeper LTC-7PN Part Number Voltage Capacity (mAh) Length (in.) Width (in.) Thickness (in.) Weight (g) LTC-7PN 3.5 750 1.00 0.65 0.26 6.8 LTC-7PN-S2 3.5 750 1.00 0.65 0.26 6.8 LTC-7PN-S4 3.5 750 0.65 0.26 1.00 6.8 LTC-7PN-SM-S4 3.5 750 1.00 0.70 0.26 6.8 SPECIFICATIONS LTC-7PN SPECIFICATIONS LTC-7PN-S4 Nominal Open Circuit Voltage, 25C .................................. 3.67 volts Nominal Open Circuit Voltage, 25C .................................. 3.67 volts Nominal Working Voltage, 25C .......................................... 3.5 volts Nominal Working Voltage, 25C .......................................... 3.5 volts Nominal Capacity (350 hr. rate), 25C .............................. 750 mAH Nominal Capacity (350 hr. rate), 25C .............................. 750 mAH Volume .............1625 cu. in. Volume .............1625 cu. in. POWER .650 0.30 0.175 LEADS Weight ...................... 6.8 GMS Weight ...................... 6.8 GMS .30 .17 Operating Temperature ............ Operating Temperature ............ + .200 ............-40C to +95C ............-40C to +95C .48 Case Material: Case Material: 1.10 1.00 304 Stainless Steel, 304 Stainless Steel, + Hermetically Sealed Hermetically Sealed .050 (case negative polarity) (case negative polarity) 0.40 0.175 1.00 Terminal and Support Pins are 0.260 Terminal and Support Pins are 0.650 0.30 .030 dia. (solder tinned) .030 dia. (solder tinned) .260 SPECIFICATIONS LTC-7PN-S2 POWER LEADS Nominal Open Circuit Voltage, 25C .................................. 3.67 volts 0.30 0.30 0.175 Nominal Working Voltage, 25C .......................................... 3.5 volts .02 Nominal Capacity (350 hr. rate), 25C................................750 mAH + Volume.........................................................................1625 cu. in. 1.085 Weight ................................................................................ 6.8 GMS 1.00 .02 The specifications on this sheet may Operating Temperature ............................................ -40C to +95C be changed by EaglePicher without Case Material: 304 Stainless Steel, Hermetically Sealed notice. (case positive polarity) EaglePicher is a trademark of and 0.650 0.260 Keeper is a registered trademark of Terminal and Support Pins are .030 dia. (solder tinned) EaglePicher Corporation. WE CAN DESIGN TO FIT ANY APPLICATION. DISTRIBUTED LOCALLY BY: Our team of engineers can design any pin configuration required to fit your specialized application. If you don t see a battery configuration you need here, call us and we will begin working on a EPT part number just for you. Keeper 3220 Industrial Drive Joplin, MO 64801 Tel: 1-800-201-0215 Fax: 417-626-2078 E-mail: solutions eaglepicher.com Web site: www.epcompower.com Copyright 2006 EaglePicher Corporation