Keeper PT-2100 SPECIFICATIONS PT-2100 DISCHARGE CHARACTERISTICS AT +20C (68F) 4.0 Typical values for batteries stored at 20C for one year 3.5 Nominal Capacity 4.0 (At 2mA/20C/68F/2.0V Cut-Off) .................. 2.4 Ah 3.0 3.5 Open Circuit Voltage (At 20C/68F) ................ 3.67 V 2.5 3.0 Nominal Voltage (At 2mA/20C/68F) ................ 3.6 V 2.5 2.0 53.0 W 558 W 1.72 kW 5.85 kW 60 kW Maximum Continuous Current .......................... 100 mA 60 mA 6 mA 2 mA 0.6 mA 0.06 mA 2.0 0.8 Ah 2.25 Ah 2.4 Ah 2.3 Ah 2.01 Ah 02 4 68 10 1.5 Maximum Pulse Current Capability .................. 200 mA Time (Sec.) Rated 1 Sec. Pulse Capability (To 3V) ................ 40 mA 1.0 2 3 4 5 0.1 1 10 10 10 10 10 Operating TIME (HOUR) Temperature Range...... -55 to +85C (-67 to +185F) CAPACITY vs. CURRENT Weight .............................................. 17.6 g (0.62 oz) 2.4 2 2 Anode Surface Area ..........................14 cm (2.17 in ) 2.2 2 2 Volume .......................................... 8.0 cm (1.24 in ) 2.0 50 C 1.8 -30 C Diameter (Max) ................................ 14.5 mm (.57 in) 20 C 1.6 72 C 1.4 Height (Max) .................................. 50.5 mm (1.99 in) 1.2 1.0 0.8 0.6 PRODUCT SCHEMATIC 0.4 0.01 0.1 1 10 100 CURRENT (mA) TEMPERATURE vs. OPERATING VOLTAGE 3.7 +0 3.9 mm - 0.1 3.6 +0 .15 (in) ( - 0.004 ) 0.2mA 3.5 + 3.4 2mA 3.3 3.2 3.1 20mA 3.0 -45 -30 -15 0 15 30 45 60 75 90 ( C) -49 -22 5 32 59 86 113 140 167 194 ( F) TEMPERATURE 9.0 0.1 ( .35 0.004) +0 14.5 - 0.2 +0 .57 ( - 0.008) WARNING: Fire, Explosion And Severe Burn Hazard. Do Not Recharge, Crush, Disassemble, Heat Above 212F (100C), Incinerate Or Expose Contents To Water LITHIUM-THIONYL CHLORIDE BATTERIES +0 50.5 - 0.3 +0 1.99 ( ) - 0.012 0.5 (.02) VOLTAGE (V) Voltage (V) CAPACITY (Ah) VOLTAGE (V)3.9 (0.15) 7.55 0.75 x 0.2 (0.30) (0.030 x 0.008) 0.75 x 0.2 (0.030 x 0.008) 3.5 3.5 (0.14) (0.14) 3.17 x 0.15 (0.12 x 0.01) 0.75 x 0.2 (0.030 x 0.008) Keeper PT SERIES PT-2100 THE ECONOMICAL HIGH-POWER SOLUTION TERMINAL TYPES The EaglePicher PT Series of KEEPER cells was developed as an economical, high-power option for design experts who prefer the mm (in) PT-2100 cylindrical design. With sizes and capacities ranging from the 1200 mAh (PT-2150) to the 19,000 mAh (PT-2300H), this cylindrical design will provide the long life power needed for Tab (-T) commercial applications. PT SERIES PRODUCT FEATURES Compliant with lead-free RoHS and WEEE EC directives. Pins (-P) Stainless steel construction provides corrosion resistance, hermetic seal and structural integrity. Years of low-rate continuous use. Pin Tabs (-PT) Stand-by use with 80% capacity retention after 15 years at room temperature. Wave solderable (limit solder bath exposure to a maximum of 5 seconds). High energy density compared to other chemistries. Axial (-A) D=0.75 No charging circuits required. (0.030) Higher cell voltage allows for fewer cells and high reliability. Connector (-S) Flat discharge characteristics provide optimum voltage regulation. Connector Type: Tyco / Molex / JST / Berg / Tamiya Non-pressurized system allows for high-temperature usage. Underwriters Laboratories recognized component. The specifications on this sheet may be changed by EaglePicher without notice. EaglePicher is a trademark of and Keeper is a registered trademark of EaglePicher Corporation. WE CAN DESIGN TO FIT ANY APPLICATION. DISTRIBUTED LOCALLY BY: Our team of engineers can design any pin configuration required to fit your specialized application. If you don t see a battery configuration you need here, call us and we will begin working on a EP part number just for you. Keeper 3220 Industrial Drive Joplin, MO 64801 Tel: 1-800-201-0215 Fax: 417-626-2078 E-mail: solutions eaglepicher.com Web site: www.epcompower.com Copyright 2006 EaglePicher Corporation 45 45 (1.77) (1.77) 19.5 (0.77) 14.9 (0.59) 5.5 (0.22) 19.5 (0.77) 5.5 (0.22) 7 (0.28)