Keeper PT-2150 SPECIFICATIONS PT-2150 DISCHARGE CHARACTERISTICS AT +20C (68F) 4.0 Typical values for batteries stored at 20C for one year 3.5 Nominal Capacity 4.0 (At 1mA/20C/68F/2.0V Cut-Off) .................. 1.2 Ah 3.0 3.5 Open Circuit Voltage (At 20C/68F) ................ 3.67 V 2.5 3.0 Nominal Voltage (At 1mA/20C/68F) ................ 3.6 V 2.0 2.5 163 W 1.68 kW 3.52 kW 17.5 kW 180 kW Maximum Continuous Current ............................ 50 mA 20 mA 2 mA 1 mA 0.2 mA 0.02 mA 0.51 Ah 1.13 Ah 1.2 Ah 1.1 Ah 0.9 Ah 2.0 1.5 Maximum Pulse Current Capability .................. 100 mA 02 4 6 8 10 Time (Sec.) Rated 1 Sec. Pulse Capability (To 3V) ................ 20 mA 1.0 2 3 4 5 0.1 1 10 10 10 10 10 Operating Temperature TIME (HOUR) Range .................... -55 to +85C (-67 to +185F) CAPACITY vs. CURRENT Weight .............................................. 9.2 g (0.324 oz) 2 2 1.2 Anode Surface Area ............................6 cm (0.93 in ) 20 C 1.1 2 2 Volume .......................................... 4.3 cm (0.67 in ) 1.0 72 C 0.9 Diameter (Max) ................................ 14.5 mm (.57 in) 0.8 Height (Max) .................................... 25.2 mm (.99 in) 0.7 -30 C 50 C 0.6 0.5 0.4 PRODUCT SCHEMATIC 0.3 0.01 0.1 1 10 CURRENT (mA) TEMPERATURE vs. OPERATING VOLTAGE 3.7 3.6 +0 3.9 mm - 0.1 0.06mA 3.5 +0 .15 (in) - 0.004 3.4 1mA + 3.3 3.2 3.1 6mA 3.0 -45 -30 -15 0 15 30 45 60 75 90 ( C) -49 -22 5 32 59 86 113 140 167 194 ( F) TEMPERATURE 9.0 0.1 ( .35 0.004) +0 14.5 - 0.2 +0 .57 ( - 0.008) WARNING: Fire, Explosion And Severe Burn Hazard. Do Not Recharge, Crush, Disassemble, Heat Above 212F (100C), Incinerate Or Expose Contents To Water LITHIUM-THIONYL CHLORIDE BATTERIES +0 25.2 - 0.3 +0.01 0.98 ( - 0.012 ) 0.5 (.02) VOLTAGE (V) Voltage (V) CAPACITY (Ah) VOLTAGE (V)16.6 (0.65) 3.9 (0.15) 7.55 0.75 x 0.2 (0.30) (0.030 x 0.008) 0.75 x 0.2 (0.030 x 0.008) 3.5 3.5 (0.14) (0.14) 3.17 x 0.15 (0.12 x .01) 0.75 x 0.2 (0.030 x 0.008) Keeper PT SERIES PT-2150 THE ECONOMICAL HIGH-POWER SOLUTION TERMINAL TYPES mm The EaglePicher PT Series of KEEPER cells was developed as an (in) PT-2150 economical, high-power option for design experts who prefer the cylindrical design. With sizes and capacities ranging from the 1200 mAh (PT-2150) to the 19,000 mAh (PT-2300H), this Tab (-T) cylindrical design will provide the long life power needed for commercial applications. PT SERIES PRODUCT FEATURES Pins (-P) Compliant with lead-free RoHS and WEEE EC directives. Stainless steel construction provides corrosion resistance, hermetic seal and structural integrity. Pin Tabs (-PT) Years of low-rate continuous use. Stand-by use with 80% capacity retention after 15 years at room temperature. Housing Wave solderable Axial (-A) (limit solder bath exposure to a maximum of 5 seconds). D=0.75 (0.030) High energy density compared to other chemistries. No charging circuits required. Higher cell voltage allows for fewer cells and high reliability. Flat discharge characteristics provide optimum voltage regulation. Connector (-S) Non-pressurized system allows for high-temperature usage. Connector Type: Tyco / Molex / JST / Berg / Tamiya Underwriters Laboratories recognized component. The specifications on this sheet may be changed by EaglePicher without notice. EaglePicher is a trademark of and Keeper is a registered trademark of EaglePicher Corporation. WE CAN DESIGN TO FIT ANY APPLICATION. DISTRIBUTED LOCALLY BY: Our team of engineers can design any pin configuration required to fit your specialized application. If you don t see a battery configuration you need here, call us and we will begin working on a EP part number just for you. Keeper 3220 Industrial Drive Joplin, MO 64801 Tel: 1-800-201-0215 Fax: 417-626-2078 E-mail: solutions eaglepicher.com Web site: www.epcompower.com Copyright 2006 EaglePicher Corporation 30 (1.18) 26 (1.02) 25 (0.98) 45 45 (1.77) (1.77) 19.5 (0.77) 14.9 (0.59) 5.5 (0.22) 19.5 (0.77) 5.5 (0.22) 7 (0.28)