74-10003.1 EAO

Smart Box (part no. 74-10003.1) Technical specifications Description Housing construction kit with hole for EAO Series 84 emergency stop switch and hole for separate M12 plug. The housing is sealed to IP65 when assembled with the specified. Emergency Stop switch and M12 plug. Shipped: Empty Smart Box in unassembled condition plug is not included in shipment S84 emergency stop switch is not included in shipment * not included in the shipment Items / materials included in shipment: Upper part of housing: PBT / UL-V0 / colour similar to RAL1004 Lower part of housing: PBT / UL-V0 / colour similar to RAL9011 Spring element (for restraint): POM (nature) Seal: MVQ silicone foam bright Mounting adaptor: Stainless steel 1.4301 / surface vibratory finish Housing screws: Stainless steel A2 Drilling patterns: EAO Series 84 emergency stop All versions possible switch: Hole for M12 plug. Installation optimised for plugs from Murr Elektronik Basic version: Type 17162 Operating temperatures Temperature range: Rated temperature: 25C Operating temperature: -25 60C Storage temperature: -25 80C Standards Degree of protection: IP65 (in screwed condition / with mounted emergency stop switch and female connector) Created: Reviewed: Approved: Doc. No. Version / status Page 28/09/2017 / KRJ 28/09/2017 / KRJ 28/09/2017 / KRJ 19003064102 C / 2590 Series - released 1/2 EAO Systems AG CH-4600 Olten Telephone +41 62 286 91 11 Fax +41 62 296 21 62 www.eao.com Mechanical characteristics External dimensions: See dimensional diagram 1 (Female M12 connector not included) Note: - The dimensional diagrams show the housing with the emergency stop switch and M12 plug fitted (both not included in shipment) - All side walls exhibit a pull of around 1. Certificates CE Alternative fixing 3x holes for PT screw 2.5 (max. depth 6mm) Dimensional diagram 1 Mounting Mount mounting adapter onto mounting surface Mount emergency stop Smart Box on one side (note direction of mounting adapter on the housing) Push the Smart Box onto the adaptor on the other side until it audibly clicks into place Alternatively, the module can be mounted on a standard top hat rail, or it can be mounted on a base using screws on the rear (see dimensional diagrams). Dismantling Pull out spring element using screwdriver and lift Smart Box Remove Smart Box from the other side EAO reference number: Part no. 74-10003.1 EAO reserves the right to change specifications without further notice. Created: Reviewed: Approved: Doc. No. Version / status Page 28/09/2017 / KRJ 28/09/2017 / KRJ 28/09/2017 / KRJ 19003064102 C / 2590 Series - released 2/2 EAO Systems AG CH-4600 Olten Telephone +41 62 286 91 11 Fax +41 62 296 21 62 www.eao.com