Series 15300 RTMR Rear Terminal Mini Fuse & Relay The Rear Terminal Mini Fuse and Relay panel (RTMR) provides efcient power Torque Rating: 50 in-lbs (5.5N t m) max. distribution in a rugged compact form for applications in marine, construction, Mounting Torque Rating: 10-32 or M5 threaded inserts agriculture, heavy trucking, specialty vehicles, etc. This innovative product 24 in-lbs (2.7N t m) max torque. offers a weather tight enclosure (IP66) for various MINI (2.8mm) blade Ingress Protection Rating: IP66-IEC 60529 (Valid when components when cover, cable seals, and cavity plugs are installed. It is properly installed with cover, sealed terminals, and cavity available with various degrees of internal electrical bussing. Additionally, plugs.) custom labels and multiple hardware congurations are available to solve any application need. Options Specications End Caps: Protective silicone end caps available for Input Terminal Rating: M6 input studs on bussed/partially bussed inputs: 80A studded versions. max input on bussed fuse side, 80A max input on bussed relay side. Mounting: Mounting brackets available for surface-mounting Output Terminal Rating: 2.8mm blade terminals (30A max per terminal) RTMR. (See page 41.) Temperature Rating: -40C (-40F) to 125C (260F) (rating on PDM only) Labels: Consult factory for custom label options. Materials: Black thermoplastic housing Tin-plated copper internal bussing Replacement Accessories: Consult factory for available Bright nickel-plated brass studs (on bussed versions). service parts. Termination: Delphi Packard Metri-Pack 280 Series terminals Cover Marking: Laser etching on inside, outside, or both (sealed/tangless).* Delphi Packard 280 Series cavity plugs are installed where wires are not used.* Accepts 12-22 AWG wire sizes. *Electrical terminals, cable seals & cavity plugs are NOT supplied by Eaton Controls and Power Conversion Division www.cooperbussmann.com/CPCD 15300 RTMR PDM Power distributionPower distribution PDM Series 15300 RTMR Series 15300 RTMR (Dims. shown are for reference only. Consult factory for latest prints) Dimensions - mm(in) THREADED INSERT 86.0 15303-3 10-32 INSERT (3.39) 60.3 15304-4 M5 X 0.8 INSERT (2.37) 75.0 34.6 (2.95) (1.36) 62.8 (2.47) 112.8 (4.44) 106.3 (4.19) 90.6 (3.57) 105.4 25.0 (4.15) (.98) 59.3 (2.33) GORE AUTOMOTIVE VENT USED WITH 73.3 (2.89) FUSE COVER ONLY RELAY/C.B. FUSE COVER COVER SHOWN SHOWN TANGLESS FEMALE TERMINAL DELPHI PACKARD 280 METRI-PACK SERIES 12 GA. TO 20 GA. (SEE NOTE 1) CABLE SEAL DELPHI PACKARD 280 METRI-PACK SERIES BOTTOM VIEW BOTTOM VIEW BOTTOM VIEW (SEE NOTE 1) 1530X-4-X-X 1530X-1-X-X 1530X-2-X-X WIRED BASE FUSE BASE 1530X-3-X-X SEAL CONNECTOR PLUG DELPHI PACKARK MICRO/MINI BASE (NO POWER BUSS) PART NO. 12010300 (SEE NOTE 1) STUD CAPS (OPTIONAL) HEX NUTS (OPTIONAL) NOTES: 1. OUTPUT TERMINALS, CABLE SEALS AND SEALED CONNECTOR PLUGS ARE NOT PROVIDED BY COOPER BUSSMANN. 2. MOUNTING: THREADED INSERTS ( 10-32 UNF) or (M5 X 0.8) 24 IN/LBS MAX TORQUE. INPUT STUDS M6 X 1 50 IN/LBS. MAX. 3. HOUSING: 94VO THERMOPLASTIC. 4. INTERNAL BUSSING: TIN PLATED COPPER. 5. DIMENSIONS PROVIDED ARE FOR REFERENCE ONLY. 6. IP RATING: IP67 PER IEC 529. VALID WHEN COVER AND SEALED TERMINALS AND SEALED CONNECTOR PLUGS ARE PROPERLY BOTTOM VIEW BOTTOM VIEW INSTALLED. IN ORDER TO MAINTAIN A IP67 RATING IT IS RECOMMENDED THAT THE CUSTOMER PERIODICALLY APPLY A 1530X-6-X-X 1530X-5-X-X HEAVY DUTY SILICONE LUBRICANT (ie: CRC 05074 OR EQUAL) WIRED BASE WIRED BASE TO THE RTMR HOUSING GASKET. ISOMETRIC VIEW 7. TERMINAL REMOVAL TOOL: DELPHI PART NO. 12094430. (RELAY SIDE BUSS) (FUSE SIDE BUSS) SCALE: 1:1 Part Numbering System Hardware Cover Marking Series Mounting Base Options Options Options Options 15 30 3 - 10-32 Insert (English 1 - Fuse/C.B. Base (For 20 Fuses/C.B.) 0 - No Nuts 0 - No Cover Special Labels 4 - M5x0.8 Insert (Metric) 2 - Micro Relay Base (For 5 Micro Relays W/ 10 Fuses/C.B.)* 1 - Nuts (Shipped Bulk) 3 - Fuse Cover Consult Factory 3 - Mini Relay Base (For 3 Mini Relays W/10 Fuses/C.B.)* 2 - Nuts (Shipped Assembled) 4 - Relay/c.b. Cover 4 - Wired Base (Non Bussed) (No Input Studs) (For Fuses/C.B. And Relays) 2 - Nuts (Shipped Assembled) 5 - Wired Base (Input Stud Fuse Side Only) (For Fuses/C.B. And Relays) 3 - Stud Caps (Shipped Bulk) 6 - Wired Base (Input Stud Relay Side Only) (For Fuses/C.B. And Relays)* 4 - Stud Caps (Shipped Assembled) *Input stud bussed to pin 86 on relay 5 - Nuts And Stud Caps (Shipped Bulk) 6 - Nuts And Stud Caps (Shipped Assembled) RTMR Stud End Cap Mounting Brackets Material Latch Position Assurance B0 6 6 7 0 0 8 B0 2 8 7 012 15300 L P O Plated steel P Stainless steel www.cooperbussmann.com/CPCD Controls and Power Conversion Division