40DILE Eaton

Contactorrelays,aux.cont.module,4-pole Partno. 40DILE Articleno. 010304 Program Product range Accessories Description with interlocked opposing contacts Pole 4 pole Connection technique Screw terminals Contacts N/O = Normally open 4 N/O AC-15 AC-15 220 V 230 V 240 V I A 4 e 380 V I A 2 e 400 V 415 V Conv. thermal current I A 10 th Code number and version of combination DILER-40(-G) 80E DILER-31(-G) 71 DILER-22(-G) 62 Contact sequence Can be combined with contactor DILEM-10(-G)() DILEM-01(-G)() DILEM-4(-G)() DILER40(-G) DILER31(-G) DILER22 DILEEM-10(-G)() DILEEM-01(-G)() DILEM12-10(-G)() DILEM12-01(-G)() InstructionsContacts to EN 50005 Contacts according to EN 50012 are to be prefered. Version E combinations correspond to EN 50011 and are to be preferred. InstructionsNo interlocked opposing mechanism in NO early-makes and NC late-breaks. Auxiliary contact modules with positive acting contacts Approbationen Product Standards IEC/EN 60947-4-1 UL 508 CSA-C22.2 No. 14-05 CE marking UL File No. E29184 UL CCN NKCR CSA File No. 012528 CSA Class No. 3211-03 NA Certification UL listed, CSA certified Auxiliarycontacts flexible with ferrule Yes Rated impulse withstand voltage U V 6000 imp AC Overvoltage category/pollution degree III/3 Rated insulation voltage U V 690 i AC Rated operational voltage U V 600 e AC Safe isolation to VDE 0106 Part 101 and Part 101/A1 between coil and auxiliary contacts V 300 AC between the auxiliary contacts V 300 AC Rated operational current I A e 11/14/2011 HPL-ED2011 V2.0 EN (UX111) 1 / 5AC-15 220/240 V I A 4 e 60 Hz I A 2 e 500 V I A 1.5 e DC L/R 15 ms Contacts in series: A 1 24 V A 2.5 2 60 V A 2.5 3 100 V A 1.5 3 220 V A 0.5 Conv. thermal current I A 10 th -8 Control circuit reliability (at U = 24 V DC, U = 17 V, I = 5.4 mA) Failure e min min <10 , < one failure at 100 million operations rate Component lifespan at U = 240 V e AC-15 Operations x 0.2 6 10 DC Footnote Switch-on and switch-off conditions based on DC-13, time constant as specified L/R = 50 ms: 2 contacts in series at I = 0.5 A Operations x 0.15 e 6 10 Short-circuit rating without welding Maximum overcurrent protective device Short-circuit protection only PKZM0-4 Short-circuit protection maximum fuse 500 V A 6 gG/ gL 500 V A 10 fast Current heat loss at I th Per contact W 0.2 Tec hnic aldataaccordingtoETIM4.0 Suitable for earth leakage circuit breaker No Type of electric connection Screw connection Rated operation current Ie at AC-15, 230 V A 4 Mounting type Front mount Suitable for pendant switch No Suitable for front element No Suitable for circuit-breakers No Suitable for safety position switches No Suitable for step switches No Suitable for pressure switch/selector switch actuator No Suitable for cam switches No Suitable for motor protective circuit breakers No Suitable for series-mounting relays No Suitable for solenoid No Suitable for compact switch-disconnector No Suitable for miniature circuit-breakers No Suitable for pulse relay No Suitable for contactor relay relay YES Suitable for pendant pushbutton No Suitable for residual current device No Number of contacts as change-over contact 0 Number of contacts as N/O 4 Number of contacts as NC 0 11/14/2011 HPL-ED2011 V2.0 EN (UX111) 2 / 5