Bussmann
In-Line Fuseholder HR and HM
For Type SFE and Various Length Fuses Series
Dimensional Data: All dimensions (0.015)
2.19"2.19"
(55.6mm)
0.75"
(19.1mm)
0.69"
(17.5mm)
0.38"
1.56"
(9.5mm)
(39.7mm)
General Information:
Bayonet type knob.
Maximum current rating 20 amps; voltage rating 32 volts AC.
Holders available as complete assembly consisting of in-line
Catalog Symbols: HRJ, HRI, HRH, HRE, HRG, HRF, HMJ,
holder with 8 or 14 of #14 insulated wire and installed
HMI, HMH, HME, HMG, HMF
fuses.
In-Line Fuseholders
Replacement springs BK/1A1853.
Ampere Rating: 20 Amperes
Replacement contacts 9838 for #18 - #22 wire.
Voltage Rating: 32 Volts AC
9841 for #12 - #16 wire.
Temperature Rating (RTI): 140C
Agency Approvals:
No agency listing.
Catalog
Symbol Amps Volts AC Includes Fuse Wire
HRJ* SFE-20
__________ ____________________
HRI SFE-14
__________ ____________________
HRH SFE-9
__________ ____________________
19 of #14
HRE SFE-7
__________ ____________________
HRG SFE-6
__________ ____________________
HRF SFE-4
__________ _______________________________________
20 32
HMJ** SFE-20
__________ ____________________
HMI SFE-14
__________ ____________________
HMH SFE-9
__________ ____________________
8 of #14
HME SFE-7
__________ ____________________
HMG SFE-6
__________ ____________________
HMF SFE-4
*Also available as in-line fuseholder only with lead wire contacts,
HRJ-Less-Fuse.
**Also available as in-line fuseholder only with lead wire contacts,
HMJ-Less-Fuse.
HDJ-A For 1 fuse, no wire or fuse included, accepts #18 - #20 wire.
HDJ-B For 1 fuse, no wire or fuse included, accepts #12 - #16 wire.
HDI-A For fuse, no wire or fuse included, accepts #18 - #20 wire.
HDI-B For fuse, no wire or fuse included, accepts #12 - #16 wire.
HAF-A For fuse, no wire or fuse included, accepts #18 - #20 wire.
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin
is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Form No. HR and HM Series
12-21-98 Page 1 of 1
BIF Doc #2122
SB98107 Rev. A