DATASHEET - C22-DL-R-K01-24-P62 Illuminated pushbutton actuator, classic, at, tasted, 1 N/C, red, 24 V AC/ DC, cable (black) with non-terminated end, 4 pole, 1 m Part no. C22-DL-R-K01-24-P62 Catalog No. 185587 Delivery program Product range RMQ compact solution Basic function Illuminated pushbutton actuators Single unit/Complete unit Complete unit Design Flat momentary Connection type Cable (black) with non-terminated end, 4 pole Cable Length m 1 Colour LED LED Red Button plate button plate red Button plate Blank Rated operational voltage LED 24 V AC/DC Name None Degree of Protection IP66, IP67, IP69K (front) IP65 (on rear) Front ring Bezel: titanium Connection to SmartWire-DT no Contacts N/C = Normally closed 1 NC Notes = safety function, by positive opening to IEC/EN 60947-5-1 Actuator travel and actuation force as per DIN EN 60947-5-1, K.5.4.1 mm 4.65 Maximum travel mm 5.7 Minimum force for positive opening N 15 03/19/2018 Eaton 185587 ED2018 V42.0 EN 1 / 3Contact sequence Contact travel = Contact closed = Contact open Contact diagram Positive opening (ZW) yes Technical data General Standards IEC/EN 60947-5-1 VDE 0660 Certications CE, UL, CSA Operating frequency Operations/h 3600 Actuating force n 5 Tightening torque Threaded ring Nm 2 Climatic proong Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Degree of Protection IP66, IP67, IP69K (front) IP65 (on rear) Mounting position As required Mechanical shock resistance, shock duration 11 ms g > 30 Contacts Rated impulse withstand voltage U V AC 800 imp Rated insulation voltage U V 30 i Overvoltage category/pollution degree III/3 Control circuit reliability 6 At 17 V DC/7 mA H F N/C contact: statistically determined 1 failure per 0.9 10 Operations Max. short-circuit protective device Fuse gG/gL A 4 Rated conditional short-circuit current I kA 1 q Switching capacity Rated operational current I A e AC-15 24 V I A 4 e DC-13 24 V I A 3 e Cable characteristics Design Cable end open Cable Length m 1 Material characteristic PUR Diameter mm 4.7 Design verication as per IEC/EN 61439 Technical data for design verication Operating ambient temperature min. C -25 Operating ambient temperature max. C 70 03/19/2018 Eaton 185587 ED2018 V42.0 EN 2 / 3