HALOGEN 3.6x10mm Axial-leaded, Fast-Acting, Single Cap Ceramic Tube Fuses HF Pb C310FC Series FREE Dimensions - mm Drawing Not to Scale Axial Leaded Device Description Agency Information cURus Approval: File E19180 Guide JDYX2/YX8 A fast-acting 3.6 x 10mm axial-leaded fuse constructed with ceramic TUV Approval: File No: J 50217156 tube and one-piece nickel-plated endcaps featuring tinned copper axial CQC: CQC12012069004 leads. Small 3.6 x 10mm size offers more design flexibility by doing away KC: SU05030-12001A 2 with conventional over-capping while providing higher I t values. Ordering Electrical Characteristics Specify packaging, product and option code (e.g., C310FC-2-TR1) 1.5I 2.1I 2.75I 4I 10I n n n n n Amp Rating Environmental Specifications: Min Max Min Max Min Max Max Terminal Strength: MIL-STD-202G Method 211A. Test Condition A 800mA~3.15A 1hour 30min 10ms 3sec 3ms 300ms 20ms Thermal Shock: MIL-STD-202G,Method 107G Features (Test Condition 5cycles -40C to 85C) Single cap, axial leaded, fast-acting fuse Resistance to Moisture: MIL-STD-202G, Method 106, Humidity 3.6 x 10mm physical size (90~98%RH), Heat (65C) Ceramic tube, nickel-plated brass endcap construction Vibration: MIL-STD-202G, Method 201A (10~55Hz) Condition A Tinned copper axial leads Salt Spray: MIL-STD-202G, Method 101D, Test Condition B Designed to IEC60127-3, Sheet 3 Solderability: J-STD-002C, Test Method C1 RoHS complaint, lead-free and halogen free cURus, TUV, CQC, KC Agency approvals Specifications Catalog Voltage Interrupting Rating Typical Cold Typical Max. Voltage Agency Information 2 2 Number Rating Vac 250Vac (Amps) Resistance (m)* Melting I t (A s)** Drop (mV)*** cURus TUV CQC KC C310FC-800mA-R 250 35 70 0.56 180 X X C310FC-1.6A-R 250 35 34.5 2.2 120 X X X X C310FC-2A-R 250 35 26 3.8 100 X X X X C310FC-3.15A-R 250 35 15 13.3 100 X X X X * Typical Cold Resistance (Measured at <10% of rated current). 2 ** Typical Melting I t (Tested at 10l ). n *** Maximum Voltage Drop (Voltage drop was measured at 25C ambient temperature at rated current). 0812 BU-SB12692 Page 1 of 2 Data Sheet 4415Wave Soldering Parameters Time-Current Curves Note: These devices are NOT recommended for IR or convection reflow processes. 1000.000 100.000 10.000 Time-Current Curves 1.000 Reservoir Temperature: 260C 3C Soldering Time: 3 seconds max. 0.100 Hand Solder Parameters (Not Recommended) Soldering Iron Tip Temperature: 350C 5C Heating Time: 4-5 seconds max. 0.010 Temperature Derating Curve 0.001 100.0 0.1 1.0 10.0 1000.0 Current in Amps Packaging Code Packaging Code Suffix Description -TR1 1500 Fuses on a reel, five (5) reels in one (1) carton The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information con- tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life sup- port systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2012 Cooper Bussmann www.cooperbussmann.com 0812 BU-SB12692 Page 2 of 2 Data Sheet 4415 Time in Seconds 800mA 1.6A 2A 3.15A