Bussmann HRCII-C Current-Limiting Fuses CGL 600 Volt, 1 to 600 Amps Dimensional Data 0.81 0.22 0.22 (20.64mm) (5.56mm) (5.56mm) 0.06 2.0 (1.59mm) (50.8mm) 0.34 0.94 2.80 (8.73mm) (23.81mm) (71.04mm) 3.31 (84.14mm) CGL 1-30 0.81 0.22 0.22 (20.64mm) (5.56mm) (5.56mm) 0.06 2.0 (1.59mm) (50.8mm) 0.50 2.80 (12.7mm) 1.06 (71.04mm) (26.92mm) 3.5 (88.9mm) CGL 40-50 Catalog Symbol: CGL 1.34 0.343 0.343 (34.04mm) (8.71mm) (8.71mm) Current-Limiting Ampere Rating: 1 to 600 Amperes 0.09 Voltage Rating: 600 Volts AC (or less) 2.39 (2.29mm) 0.75 (60.72mm) 1.375 1 to 30 Amps, 250 Volts DC (or less) (19.05mm) 3.64 (34.93mm) (92.47mm) Interrupting Rating: 200,000A RMS Sym. 4.31 (109.54mm) 40,000A DC (1 to 30A) CGL 70-100 Agency Approval: CSA Certified, Class 1422, File 53787 0.343 0.343 (8.71mm) (8.71mm) General Information: TRON HRC FORM II Class C Fuses TRON HRCII-C fuses are designed to withstand inrush 0.125 3.00 currents on typical motor start-ups while offering high (3.18mm) 0.75 (76.2mm) 1.50 (19.05mm) 4.30 (38.1mm) current limitation in the short-circuit region. (109.22mm) 5.31 The TRON HRCII-C fuses can be sized close to the motor (134.87mm) nameplate rating. CGL 125-200 0.19 Closer protection is offered for many motor sizes with the (4.76mm) 1.0 availability of these additional fuse ratings. 0.38 (9.53mm) (25.4mm) TRON HRCII-C fuses have a high degree of current-limitation greatly reducing the magnetic forces and thermal stresses produced in todays high capacity systems. 1.0 (25.4mm) TRON HRCII-C fuses have an interrupting rating of 200,000 3.0 2.38 (76.2mm) (60.33mm) 5.25 RMS symmetrical amperes at 600 volts. (133.35mm) 8.19 TRON HRCII-C fuses are dimensionally interchangeable with (207.96mm) other Form II fuses on the market and can be used with the CGL 225-400 same confidence as other High Quality Buss Fuses. 1.0 0.41 (25.4mm) (10.32mm) 1.0 (25.4mm) .60 (15.24mm) 3.0 0.375 (76.2mm) (9.53mm) 5.25 3.00 (133.35mm) (76.2mm) 8.19 (207.96mm) CGL 450-600 Form No. CGL Page 1 of 3 08-01-18 SB01155 BIF Doc 4125 Bussmann HRCII-C Current-Limiting Fuses CGL 600 Volt, 1 to 600 Amps CGL - Minimum Melt CGL - Minimum Melt AMPERE RATING 1,000 AMPERE RATING 1,000 100 100 10 10 1 1 .1 .1 .01 CURRENT IN AMPERES .01 CURRENT IN AMPERES Form No. CGL Page 2 of 3 08-01-18 SB01155 BIF Doc 4125 TIME IN SECONDS 1 1 2 3 4 10 6 8 10 15 20 100 1,000 TIME IN SECONDS 40 25 30 40 50 100 60 80 100 125 150 200 250 300 350 400 450 1000 500 600 10,000 20,000