Photoelectric sensors Test the Best Photoelectric Sensors: SM Series The SM Series exhibits superior excess gain. This means that in equal environments, with equal SM Series levels of contamination, the SM Sensor Series will perform more reliably over time, with less false trips. TargetLock: Taking the Guesswork Out of Alignment The performance of a sensor matters little if its misaligned in the first place. Even if youve never touched a sensor before, TargetLock helps you setup with the speed and accuracy of an expert. Compact, with industry-standard 18mm threaded barrel mounting. Understanding the Bene ts of Excess Gain Excess gain is a measurement of how much sensing power a photoelectric sensor has avail- Throughout the alignment pro- able beyond the power required cess, an internal microprocessor to detect an object. An excess constantly measures the signal gain of 1.00 at a given range strength received, and commu- means there is just enough nicates this through an orange If a sensor on your machine sensing power to detect an LED on the top of the unit. This goes down, it can take your object under perfect conditions. LED changes from off, to short line with it. But what if there In the real world, there is con- flash, to long flash, to solid-on was a sensor smart enough to taminationdust, dirt, oils, and as you approach optimum align- notify you of failure before it debristhat can settle in the The SM Series redefines ment with the reflector. It acts happens The SM Series, with air or the lens and reduce light in a similar fashion with diffuse TargetLock marginal gain indi- optical performance among transmission. As the level of sensors to help you position the cation, does just that. As the compact photoeyes. When contamination gets worse, more target at the optimum range for sensor detects that its optical excess gain is needed to push its size and reflectivity. compared to the competi- power is diminishingeither due through contamination in the to contamination or misalign- tion, Eaton sensors operate Optimizing performance pro- environment. mentthe TargetLock indicator vides a larger buffer against more releably in the pres- warns of an impending failure. The SM Series provides the reliability problems due to dirty ence of dust, humidity and highest excess gain in its operat- lenses or misalignment that The intelligence of TargetLock, ing class. In the chart below, the can occur with impact or vibra- debris. Higher reliability combined with best-in-class SM Series is compared to com- tion over time. When problems sensing power, make the SM means less downtime, less petitive units in its class. occur, TargetLock alerts you to Series a compact photoelectric maintenance, and more necessary maintenancebefore sensor you can depend on, day Range (m) your machine goes down. money in your pocket. in and day out. 0.03 0.3 3.0 9.1 50 Test the Best Want to learn more about the 10 E58 Series or the rest of Eatons line of rugged sensors Visit us online and complete the Test the Best form. Were so con dent in 1 our sensors, were willing to let 0.1 1 10 30 you try one outabsolutely free. Range (feet) Note: Competitive performance information obtained Learn more at: from publicly available literature. Models compared: www.eaton.com/sensors Eaton E65-SMPR3-HL Banner QS18VN6LP A-B 42EF-P2MPB-A2 SICK EL3-N2415.Product Description Model Selection Table Catalog Number The SM Series from Eaton SM Sensing Optimum Cutoff Thru-Beam provides the highest optical per- Series Range Range Range Field of View Component Light Operate Dark Operate formance found in the compact Thru-Beam, 10-30 VDC Models with 2m Cable photoelectric sensor class. The 50 ft. 0.1-25 ft. 10 in. 10 ft. Source E65-SMTS15-HA E65-SMTS15-HA included TargetLock technology (15m) (30mm-7.5m) (254mm 3m) visually confirms the sensor is Detector E65-SMTD15-HL E65-SMTD15-HD positioned to operate with the highest possible reliability and Polarized Reflex, 10-30 VDC Models with 2m Cable also provides diagnostic informa- 10 ft. 0.1-5 ft. 1 in. 50 in. E65-SMPR3-HL E65-SMPR3-HD tion during use to inform you (3m) (30mm-1.5m) (25mm 1.3m) of impending problems, before they result in equipment down- time. Diffuse Reflective, 10-30 VDC Models with 2m Cable Beyond TargetLock, the SM 8 in. 0.25-5 in. 2 in. 5 in. E65-SMSD200-HL E65-SMSD200-HD Series includes a number of (200mm) (6-127mm) (50mm 127mm) features that simplify use. Visible sensing beams on all models Perfect Prox Background Rejection, 10-30 VDC Models with 2m Cable show you exactly where the sensor is pointing. The durable 2 in. 0.4-1.8 in. 2.3 in. 0.25 in. 2.25 in. E65-SMPP050-HL E65-SMPP050-HD (50mm) (10-45mm) (58mm) (6mm 57mm) housing features multiple mount- ing options to easily fit on your 4 in. 0.5-3.0 in. 5.0 in. 0.35 in. 5.0 in. E65-SMPP10-HL E65-SMPP100-HD equipment, even in the tightest (100mm) (13-76mm) (127mm) (9mm 127mm) spaces. Bright LED status indi- Sensor will ignore a 90% reflectance white card atand beyondthis range. cators are visible from all angles. This family is also available in AC/DC (18-264V AC, 18-50V DC) configuration. To specify an AC/DC model, simply substitute the H in the model num- Comprehensive electrical pro- ber with a G (for example, E65-SMPR3-HL would become E65-SMPR3-GL). For a complete model selection table, see the Sensing Solutions Catalog tectionsovervoltage, reverse (CA08100010E) available online at www.eaton.com/sensors and orderable from Eatons Literature Fulfillment Center at 800-957-7050. polarity, short circuitreduce This family is also available with 4-pin micro connectors. To specify an micro connector model, simply add a D to the end of the model number (for exam- the change of damage. ple, E65-SMPR3-HL would become E65-SMPR3-HLD). For a complete model selection table, see the Sensing Solutions Catalog (CA08100010E) available online at www.eaton.com/sensors and orderable from Eatons Literature Fulfillment Center at 800-957-7050. Features Highly visible LED indica- Wiring Diagrams Mounting tors for power, output and Operating Voltage Cable Models Micro Connector Models The SM Series features two TargetLock mounting holes in the rectan- 4-Wire Sensors TargetLock simplifies setup gular section of the body for 10-30V DC BN and ensures optimum sensor L2 or +V L1 or (-) mounting to a surface with 6 or WH performance L1 No Load smaller hardware. The threaded BK or (-) Connection No Load barrel and jam nut allow mount- Full family includes thru-beam, BU L2 or Connection +V ing into any 0.75 in. (19mm) polarized reflex, diffuse and hole. Additionally, a selection of Perfect Prox models This family is also available in AC/DC (18-264V AC, 18-50V DC) configuration. For a complete accessory mounting brackets model selection table, see the Sensing Solutions Catalog (CA08100010E) available online at Available Perfect Prox models are available from Eaton (see www.eaton.com/sensors and orderable from Eatons Literature Fulfillment Center at 800-957-7050. sense different colored targets Sensing Solutions Catalog for at the same range, ignoring full model selection). background objects Dimensions Mounting Sensor Using 6 Hardware Available in AC/DC (18-264V Approximate dimensions in inches (mm). AC, 18-50V DC) or DC-only 1.29 (33 ) M18 x 1.0 (10-30V DC) AC/DC Models 0.3 5 (9) Visible red sensing beams on Only 1.51 (38) all models 0.8 3 1.02 1.70 2.17 1.6 3 (43 ) (21) (26) 1.47 (55) (41) Compact size to fit into tight (37) 1.05 spaces (27) 0.58 (15) 0.16 (4) Cable Connector 2 places Models Models Multiple mounting options 0.75 (19) 0.41 (10) 0.10 including industry-standard (2.5) 18mm threads Mounting Sensor Using Jam Nut C-UL Listed, CE Approved Eaton Corporation Electrical Sector 1111 Superior Ave. Cleveland, OH 44114 United States 877-ETN-CARE (877-386-2273) Eaton.com Eaton is a registered trademark of Eaton 2011 Eaton Corporation Corporation. All Rights Reserved Printed in USA All other trademarks are property of their Publication No. PA05305004E / RG respective owners. August 2011