BUSSMANN Effective April 2017 Technical Data 1161 Supersedes April 2016 SERIES CUBEFuse Compact Circuit Protector Base (CCPB) Features and benefits: 2011/65/EU Uses finger-safe, current-limiting Class CF CUBEFuse with Class J performance available, time-delay or fast-acting versions from 1 to 100 amps* Patented ampacity rejection feature helps prevent overfusing High 200kA short-circuit current ratings Disconnect rated to provide means for load isolation All versions are full voltage rated at 600Vac 125Vdc rated for 80A and below UL 98 Listed and suitable for branch circuit disconnect 1-, 2- and 3-pole versions are horsepower rated Listed to UL and cULus Open fuse indication light per pole Additional open fuse indication can be provided by using the time-delay indicating CUBEFuse version Built-in switch/fuse interlock prohibits fuse removal while energized Permanent lockout/tagout provisions Lock-On provision available when used in the Bussmann series Quik-Spec Coordination Panelboard (QSCP) * See data sheet 9000 for time-delay CUBEFuse and data sheet 2147 for fast-acting CUBEFuse specifications. Product description: The revolutionary Bussmann series Compact Circuit Protector Base (CCPB) with CUBEFuse is designed as a fused branch circuit disconnect switch for the Bussmann series Quik-Spec Coordination Panelboard. The CCPB with CUBEFuse simplifies selective coordination and lockout/tagout provisions allow for isolation of individual branch circuit loads for safe work practices.Technical Data 1161 CUBEFuse Compact Circuit Protector Base (CCPB) Effective April 2017 for QuikSpec Coordination Panelboards Specifications: Switch ampacity and rejection breaks 15A, 20A, 30A, 40A, 50A, 60A, 70A, 90A and 100A Poles 1-, 2- and 3-pole versions Volts 600Vac (or less) 125Vdc (15, 20, 30, 40, 70 and 90 amp switches with 80A fuse) Agency information UL 98 Listed, File E302370, Guide WHTY cULus to CSA Standard 22.2 No. 4, File E302370, Guide WHTY7 CE compliant RoHS compliant Terminals 1-Pole 2-Pole 3-pole Lineside bolt-on bus connector and torque CCPB-1- CF CCPB-2- CF CCPB-3- CF Bolt-mounted design into Quik-Spec Coordination Panelboard bus 10-32-UNC Hex flange Phillips screw 25 Lb-In (2.8 Nm) Loadside box lug terminal and torque 15-60A: 2 18 to 10 AWG (1 to 6mm ) single or dual rated (same size Lineside bolt-on wire), solid or stranded 75C or higher - Cu only bus connector 20 Lb-In (3.4 Nm) 2 8 to 6 AWG (10 to 16mm ) single or dual rated (same size wire), solid or stranded 75C or higher - Cu only 35 Lb-In (5.8 Nm) 2 4 AWG (25mm ) single 75C or higher - Cu only 35 Lb-In (5.8 Nm) 100A: Switch ON and OFF 2 symbols 18 to 10 AWG (1 to 6mm ) single, solid or stranded 75C or higher - Cu only 25 Lb-In (2.82 Nm) 2 8 to 1 AWG (10 to 45mm ) single stranded 75C or higher - Cu only 40 Lb-In (4.52 Nm) Lockout/tagout provision 2 6 AWG (16mm ) dual stranded (same size wire) 75C or higher Cu only 45 Lb-In (5.08 Nm) Switch handle Loadside fork terminal Max. 30A suitable for use with 8-32UNC screw Local open fuse Lockout/tagout indication light 4mm shank lock Local open fuse indication CUBEFuse base Light illumination requires closed circuit and minimum 90V operating voltage Shipping weight 2.03 lbs per carton Carton quantity 6 poles Environmental data Storage and operating temperature -20C to 75C** ** For fuse performance under or above 25C, consult fuse performance derating Loadside Loadside charts. box lug fork terminal terminal 2 Eaton.com/bussmannseries