Effective June 2017 Technical Data 10007 Supersedes September 2012 FP1007R6 High frequency, high current power inductors Applications Multi-phase regulators Voltage Regulator Modules (VRMs) Desktop and server VRMs and EVRDs Data networking and storage systems Graphics cards and battery power systems Point-of-Load modules DCR Sensing Environmental data SMD Device Storage temperature range (component): -40 C to +125 C Product features Operating temperature range: -40 C to +125 C 10.5 x 8.0 x 7.0mm Maximum surface mount (ambient plus self-temperature rise) package Solder reflow temperature: Ferrite core material J-STD-020 (latest revision) compliant Controlled DCR tolerance for sensing circuits HALOGEN Inductance Range from 150nH to 470nH Pb HF Current range from 23.5 to 75 Amps FREE Frequency range up to 2MHz Halogen free, lead free, RoHS compliantFP1007R6 Technical Data 10007 Effective June 2017 High frequency, high current power inductors Product Speci cations 1 2 3 4 5 Part OCL 10% FLL Min. I I 1 25C I 2 100C DCR 20C rms sat sat 7 6 Number (nH) (nH) (Amps) (Amps) (Amps) (m) K-Factor FP1007R6-R15-R 150 108 75.0 60.0 FP1007R6-R18-R 180 129 60.0 50.0 FP1007R6-R22-R 220 158 50.0 40.0 FP1007R6-R27-R 270 194 61 41.0 33.0 0.29 5% 348.8 FP1007R6-R33-R 330 237 33.0 26.5 FP1007R6-R39-R 390 280 28.0 22.5 FP1007R6-R47-R 470 338 23.5 19.0 1. Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10V , 0.0Adc 5. I 2: Peak current for approximately 20% rolloff at +100C. rms sat 6. K-factor: Used to determine Bp-p for core loss (see graph). B = K * L 2. Full Load Inductance (FLL) Test Parameters: 100kHz, 0.1V , I 1 p-p rms sat -3 3. I : DC current for an approximate temperature rise of 40C without core loss. Derating is rms * I * 10 . B :(Gauss), K: (K-factor from table), L: (Inductance in nH), p-p necessary for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of I (peak-to-peak ripple current in Amps). 7. Part Number Definition: FP1007R6-Rxx-R other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed 125C under worst case operating conditions FP1007R6 = Product code and size verified in the end application. Rxx= Inductance value in uH, R = decimal point 4. I 1: Peak current for approximately 20% rolloff at +25C. -R suffix = RoHS compliant sat Dimensions- mm The nominal DCR is measured from point to point Part Marking: 1007R6, Rxx = Inductance value in H. (R = Decimal point) wwllyy = Date code R = Revision level Tolerance are 0.15mm unless otherwise specified. Soldering surfaces to be coplanar within 0.1016mm. PCB tolerance 0.1mm unless otherwise specified. Packaging information - mm 1.5 dia 2.0 1.5 dia 4.0 A 1.75 1 11.5 24.0 0.30 10.60 2 8.1 12.0 Supplied in Tape-and-Reel packaging, 700 parts per 13 inch diameter reel. 7.1 A SECTION A-A www.eaton.com/electronics 2