Effective April 2016 Technical Data 10389 Supersedes May 2015 FPT1006 Dual conductor high current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental Data Storage temperature range (component): -55 C to +125 C Operating temperature range (component): -55 C to +125 C (ambient plus self-temperature rise) Solder reflow temperature: J-STD-020D compliant HALOGEN Description HF Pb FREE Dual conductor, two-turn construction Picor and Cool-Power are trademarks of Vicor Corporation. Magnetically shielded Inductance range from 340 nH to 580 nH Current range from 19 A to 40.5 A 10.5 mm x 8.8 mm footprint surface mount package in a 6.4 mm height Ferrite core material Halogen free, lead free, RoHS compliantFPT1006 Technical Data 10389 Effective April 2016 Dual conductor high current power inductors Product Specifications 4 DCR (m ) 1 2 3 OCL I I maximum rms sat 5 Part Number (nH) 10% (A) (A) 20C FPT1006-340-R 340 19 40.5 1.0 FPT1006-400-R 400 19 35.5 1.0 FPT1006-500-R 500 19 27.5 1.0 FPT1006-580-R 580 19 23.0 1.0 1. Open Circuit Inductance (OCL) Test Parameters: 100 kHz, 0.1 Vrms, 0.0 Adc, +25 C (Pins 4-2, short 1-3) 4. DCR tested from pins (1-2) and (3-4) 2. I : DC current for an approximate temperature rise of 40 C without core loss. Derating is necessary for AC currents. 5. Part Number Definition: FPT1006-xxx-R rms PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the FPT1006 = Product code and size temperature rise. It is recommended that the temperature of the part not exceed +125 C under worst case operating xxx = Inductance value in nH, conditions verified in the end application. -R suffix = RoHS compliant 3. I : Peak current for approximately 5% rolloff +25 C Note: Hipot: 250 Vdc minimum for 2 seconds, 1.0 mA pins (1-2) and pins (4-3) to core sat Dimensions (mm) 2.8 0.2 10.0 0.5 6.4 9.65 max Recommended Pad Layout Schematic 0.3 Resist area 1.5 3.0 1 4 0.4 4 3 4 3 8.5 0.3 1.5 1 2 1 2 0.5 0.56 2 3 1.2 10.0 Pins 1 and 3 connected through Part marking: FPT1006-xxx, xxx = inductance value in nH, PCB trace wwllyy=date code, R=revision level Tolerances are 0.25 unless stated otherwise All mounting surfaces to be coplanar within 0.102 mm www.eaton.com/elx 2 FPT1006-XXX wwllyy R